[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

52.0. "VMS NCP load node works" by ZPOVC::RAMARAJ () Thu Jul 30 1992 23:27

    I have upgraded abt 5 DECbridge 90s using the faithfull VMS 
    NCP load node <nodename>
    
    put the bridge firmware in MOM$Load and the load file in
    NCP for the bridge as <name of firmware filename>
    
    Ex.
    
    ncp set node 13.1 db90 hard add 08-00-2b-xx-xx-xx service circ sva-0 -
        load file = wgb_rbms_v25.exe
    
    make sure your circ is service enabled and load node db90.
    
    If you have a VMS system around, this is easier.
    
    Raj
    Singapore
T.RTitleUserPersonal
Name		DateLines
52.1oops!! wrong placeZPOVC::RAMARAJThu Jul 30 1992 23:295
    Sorry,  .0 should be a reply to 51.  Typed too fast.  
    
    Sorry again
    
    Raj