| Title: | Atari ST, TT, & Falcon | 
| Notice: | Please read note 1.0 and its replies before posting! | 
| Moderator: | FUNYET::ANDERSON | 
| Created: | Mon Apr 04 1988 | 
| Last Modified: | Tue May 06 1997 | 
| Last Successful Update: | Fri Jun 06 1997 | 
| Number of topics: | 1433 | 
| Total number of notes: | 10312 | 
    Hi Everyone....
    
    I am looking for any guru type who can tell me what to do......
    
    In my note 1243 I mentioned I was getting my MEGA 2 upgraded. I
    had an additional 2 Meg Ram (DRAM), and a T16 "Add-speed" (By Fast
    Technologies......
    
    
    Now most of the things I have on my HARDDISK (MEgafile 30) won't
    run! They act like they are executing and then they get 2 or 3 bombs
    and ALWAYS say "Bus Error". 
    
    They installed a switch to turn off the caching, and when turned off,
    some of my telecommunications software works, and some games will work
    for a little while before they get the same BUS error. 
    
    What should I do? Anything I execute from my floppy drive works, so I
    assume that the additional speed is too much for the Hard disk drive.
    
    Is there some software I can use to slow down the hard disk access
    (like was done in the early IBM PC days.....???? Has anyone fought
    this battle? )
    
    Or am I now stuck with a non-functioning Atari because I wanted to
    speed it up?
    
    ANY suggestions would be appreciated...
    
    Thanks (sigh)
    
    Len 
| T.R | Title | User | Personal Name | Date | Lines | 
|---|---|---|---|---|---|
| 1252.1 | Change the buffers | YNGSTR::WALLACE | Wed Mar 04 1992 11:56 | 5 | |
| I'm not sure but it sounds more like you need the buffers in your mega
upgraded. This is a known problem with add ons in the mega, they load down the
bus to much for the buffers ('244's?) to handle.
	Ray
 | |||||
| 1252.2 | Replace the Driver | VNABRW::KRONSTEINER | Thu Mar 05 1992 07:13 | 10 | |
|     Lets assume the ST-memory is ok. there is a good chance that the
    bus-drivers (buffers latches) work at their limit.
    Start to replace the 74ls373 with (74f373, or 74al(s)373, or 74hct373)
    next do the same with the 74ls244.
    I changed to F- type TTL-chips and was able to reduce the Waitstates
    for the rom-access on my accelerator-board. ( got bombs with the LS)
    With HCT-type chips I got bombs on an intermittend base.	
    Have no experience with AL or ALS chips but they should work also.	  
    
    Armin
 | |||||