| Hello,
I want to install DOCUMENT V3,2-A from scratch on one
machine under OpenVMS ALPHA V7.1 but i have this :
SYSTEM-DENTI> product install * /source=DNFS30:[KIT.DOCUMENT.032.ALPHA]
The following product has been selected:
TTI AXPVMS DOCUMENT V3.2-A Layered Product
Do you want to continue? [YES]
Configuration phase starting ...
You will be asked to choose options, if any, for each selected product and for
any products that may be installed to satisfy software dependency requirements.
TTI AXPVMS DOCUMENT V3.2-A: DECdocument for OpenVMS Alpha.
DECdocument V3.2a Copyright 1995-1996 Touch Technologies, Inc.
Have you loaded and registered your DECdocument PAK?
Do you want the defaults for all options? [YES]
Have you completed the preinstallation steps? Press <HELP> for details.
Do you want to continue? [YES]
Do you want to review the options? [NO]
Execution phase starting ...
The following product will be installed:
TTI AXPVMS DOCUMENT V3.2-A Layered Product
Portion done: 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%
%PCSI-I-PRCOUTPUT, output from subprocess follows ...
%DCL-W-IVVERB, unrecognized command verb - check validity and spelling
%DCL-W-IVVERB, unrecognized command verb - check validity and spelling
%INSTALL-E-OPENIN, error opening DISK$DENTI_SYS:<DOC$TOOLS.TOOLS>DOC$MSG_AXP.EXE
; as input
-RMS-E-DNF, directory not found
-SYSTEM-W-NOSUCHFILE, no such file
%PCSI-E-EXESTAFAIL, execute start failed; status returned from DCL follows
-INSTALL-E-OPENIN, error opening !AS as input
%PCSI-E-OPFAILED, operation failed
Terminating is strongly recommended. Do you want to terminate? [YES]
%PCSIUI-E-INVALKEY, that key is not valid
Terminating is strongly recommended. Do you want to terminate? [YES] no
Portion done: 100%
The following product has been installed:
TTI AXPVMS DOCUMENT V3.2-A Layered Product
%PCSI-I-IVPEXECUTE, test procedure executing ...
%PCSI-I-PRCOUTPUT, output from subprocess follows ...
%DCL-W-ACTIMAGE, error activating image DOC$DOCUMENT
-CLI-E-IMGNAME, image file DSA100:[DOC$TOOLS.][TOOLS]DOCUMENT_AXP.EXE;
-RMS-E-DNF, directory not found
-SYSTEM-W-NOSUCHFILE, no such file
-DOC-I-IVPFAIL, Error messages can be found in DOC$TEMPLATES:DOC$SAMPLE.LIS.
%PURGE-W-SEARCHFAIL, error searching for DOC$ROOT:[TEMPLATES]DOC$SAMPLE*.*;
-RMS-E-DNF, directory not found
-SYSTEM-W-NOSUCHFILE, no such file
%PCSI-I-IVPSUCCESS, test procedure completed successfully
TTI AXPVMS DOCUMENT V3.2-A: DECdocument for OpenVMS Alpha.
Users of this product require the following process resource limits:
FILLM minimum 30
Users of this product require the following process resource limits:
PGFLQUOTA minimum 25000
This product requires the following SYSGEN parameters:
VIRTUALPAGECNT minimum 25000
This product requires the following SYSGEN parameters:
GBLPAGES minimum 102
This product requires the following SYSGEN parameters:
GBLSECTIONS minimum 1
Insert the following lines in SYS$MANAGER:SYSTARTUP_VMS.COM:
@sys$startup:doc$startup.com
%PCSIUI-I-COMPWERR, operation completed after explicit continuation from errors
There is no directory created by the installation.
License Management Facility V1.2
License Database File: SYS$COMMON:[SYSEXE]LMF$LICENSE.LDB;1
Created on: 27-MAY-1997
Created by user: SYSTEM
Created by LMF Version: V1.2
-----------------------------------
Issuer: DIGITAL-IM&T
Authorization: BIX-IL-97002-1-998-TAEC-361
Product Name: DOCUMENT
Producer: DEC
Units: 0
Version: 0.0
Release Date: 2-JAN-1998
PAK Termination Date: (none)
Availability: 0
Activity: 000000100
Options: MOD_UNITS
Product Token: *FOR_DIGITAL_INTERNAL_USE_ONLY*
Hardware ID:
I have already installed this version on another system to replace the previous
version (V3.1F), and the install has worked fine.
Any ideas.
Thanks Michel
|
| Lynne,
I'm not clear from your note whether the new version V3.2a supports
the CUP doctypes for PostScript (as does V3.1F) and just does not
support them for HTML, or whether we have gone backwards and it
doesn't support them at all.
We have had trouble installing V3.2 (see notes 4792.4 and .1), but,
after the successful installation today I just got a message about
unrecognized doc type when I tried to compile to PostScript output
with CUP.A4.
The Graphics editor also does not seem to behave in the same way as
at V3.1F. We have lost the cropping facility, at which point it has
no advantages over DECwrite.
Do we still have installation problems, or have the facilities
changed at this release level?
Jane.
|
| Jane,
With V3.2 you should have the same capability you had before with
regard to Postcript. The cup family doctypes are not installed as part
of the writers toolkit do you need to re-install those doctypes.
RE: Graphics Editor - There have been no changes to this according to
Touch. They were not sure what you meant by the "cropping facility" and
asked if you could tell them what cpmmand/menu option isn't available
to you.
Regards,
Lynne
|