[Search for users]
[Overall Top Noters]
[List of all Conferences]
[Download this site]
| Title: | Jensen Support Information |
| Notice: | FOR OFFICIAL SUPPORT SEE 4.11 |
| Moderator: | caly70.ayo.dec.com::Gordon |
|
| Created: | Tue Feb 08 1994 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 616 |
| Total number of notes: | 2534 |
608.0. "DEC 2000/300 DE425 warm boot fails NCP-W-OPEFAI NCP-W-UNRCMP" by NNTPD::"[email protected]" (Daniel Jeyachandran) Thu Apr 17 1997 15:49
DEC 2000/300 with DE425 works OK with cold restarts with VMS V6.1.
Fails with the following error during Decnet startup on warm reboots.
ERA0_MODE is set to twisted.
Show dev era0/full shows it as DE422, but Jensen console f/w recognises
it as a DE425.
Is this the problem related to bus_mode_algorithm new?
Following is the error message.
===========================
==> Define system wide logical names
%DEl-I-SUPERSEDE, previous value of DISK$SYSTEM has been superseded
==> Install Images
==> Start DECnet
%RUN-S-PROC_ID, Identification of created process is 0000008c
%%%%%%%%%%% OPCOM 16-Apr-1997 !4:03:45.93 %%%%%%%%%%
Mesage from user DECNETon SRL1
DECnet starting
%NCP-W-OPEFAI, Operatiion failure
%SYSTEM-F-TIMEOUT, device timeout
, timeout
, fatal hardware error
%NCP-W-UNRCMP, Unrecognized component , Circuit
Circuit = ERA-0
%NCP-I-NOINFO, no information in database
%RUN-S-PROC_ID, identification of created process is 0000008E
==> Start TCP/IP
%%%%%%%%%%% opcom 16-aPR-1997 14:03:57.24 %%%%%%%%%%
Message from user multinet on SRL1
Multinrt V4,0 Rev A (4.3 bsd-taboet Networking) : loaded at 8a89c000
Copyright (c) 1986-1988 SRI International
Copyright (c) 1988-1996 TGV, Inc.
Copyright (c) Cisco systems, Inc.
[Posted by WWW Notes gateway]
| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 608.1 | Typo - Should have been bus_probe_algorithm | NNTPD::"[email protected]" | Daniel Jeyachandran | Fri Apr 18 1997 02:17 | 10 |
| Any clues to the problem.
I meant Bus_probe_algorithm & not bus_mode _algorithm.
Cust says there is no such variable.
Regards.
Daniel.
[Posted by WWW Notes gateway]
|
| 608.2 | See other notes on DE425 | NESBIT::afirm1.ayo.dec.com::Gordon | Gordon McNab | Fri Apr 18 1997 10:18 | 14 |
|
Daniel,
Jensen does not have the 'common console' like just about all other Alpha
systems, so it doesn't have the same environment variables. There is only one
I/O bus (EISA) on Jensen to work with so bus_probe_algorithm is not required.
See note 412. The DE425 NEVER worked with Jensen and OpenVMS.
Gordon
|