| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 1289.1 | | LEDS::ACCIARDI | | Fri Apr 01 1988 15:35 | 8 |
| Hold off a bit on Animate-3D. Plink reports have found a number
of annoying bugs.
I got a letter from BbB a while back announcing 68020/68881 versions
and a special version for the MicroBotics 68881 board, which I have.
Still haven't seen or heard of these version.
Ed.
|
| 1289.2 | amigaworld had an article | COROT::CERTO | | Fri Apr 01 1988 16:56 | 6 |
|
There was an article a month or two ago that discussed Videoscape 3d
and Sculpt 3d.
Fredric MONET::Certo
|
| 1289.3 | | ELWOOD::PETERS | | Fri Apr 01 1988 22:51 | 23 |
|
I have Animate-3D and it runs very well. Durring installation
it combines with Sculpt-3d to make one larger program.
I called byte by byte and ordered the 68020/68881 version. When
I called they knew exactly what I was talking about and asked who's
68020/68881 card I was using. $35 and one week later I recieved
the new disk ( version 1.102 ). The new disk contained both the
68020/68881 version as well as the normal version. The readme
file states that the 68020/68881 version will not run on a straight
Amiga. They are correct. The disk also came with some new examples
and a couple of support programs. To say the least I was very happy
with the service.
If you have any questions about new features I suggest you call
them. They have always been happy to talk about future features.
In fact I was told of the 68881 support almost a year before it
was out. Just don't get mad if futures take a little longer than
they think.
Steve Peters
|
| 1289.4 | | ELWOOD::PETERS | | Fri Apr 01 1988 22:53 | 7 |
|
One more thing the same Animate-3D work with both the normal
and 68881 versions of sculpt-3d.
Steve
|
| 1289.5 | benchmark? | WJG::GUINEAU | | Mon Apr 04 1988 08:09 | 4 |
|
So how fast is the 68020 version?
John
|