| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 907.1 | ... | LEDS::ACCIARDI | | Mon Nov 16 1987 13:17 | 8 |
| The 23 pin connector is not used to connect the A500 to a TV set.
You must use a standard RCA cable from the monochrome composite
video output to your monitor or VCR.
The A500 does not provide a color composite signal.
C-Ltd is shipping a $50 gadget that converts the 23 pin RGB signals
to very high quality color composite.
|
| 907.2 | | BAGELS::BRANNON | Dave Brannon | Mon Nov 16 1987 18:21 | 11 |
| Commodore is supposed to have an RF Modulator for the 500 according
the "Test Flight" video tape.
I have my A1000 hooked to a TV thru an RCA cable from the color
composite jack to the video-in of a VCR. Works great.
I tried the same setup with the mono composite on the A2000 last
night... slightly better picture quality, but not enough better
to justify the lack of color.
-dave
|
| 907.3 | | DCC::JAERVINEN | Don't make your personal name too long | Tue Nov 17 1987 03:04 | 7 |
| re .1, .2: All new European TV sets have RGB (I assume that's what
.0 is asking). I don't remeber the pinout by heart, though...
re .0: Is your TV a relatively new one? Does it have a 21-pin SCART
connector in the back? If yes, you can easily make a cable; if not,
you need a bit more (see .2).
|
| 907.4 | re: which pins... | ROM01::PIETRANGELI | | Tue Nov 17 1987 08:03 | 12 |
| Roma 17 november 1987 (italia)
RE .3 Thanks for your answer.
I have on my TV a 21-pin Scart, but I don't know which pins
I must use on the 23-pin connector on AMIGA.
I need of scheme !!
Bye <---> Ciao
Gianluca -------*
|
| 907.5 | | DCC::JAERVINEN | Don't make your personal name too long | Tue Nov 17 1987 08:48 | 15 |
| That's what I thought.
It's very simple - but I have all the info at home, and I won't
be back in the office before next Monday (and I think you want to
use your Amiga ASAP). If you can wait that long, I can give you
the info. Also, most good (European) Amiga dealers should stock
an Amiga-SCART cable.
If you cannot wait, I'm sure someone here can give the pinout of
the Amiga 23-pin connector - and you should be able to find out
the SCART pinout from any TV dealer (or from the manual for your
TV).
Or, ask Marco CESARE::Zabot in Torino - I'm sure he can help too.
|
| 907.6 | Receipe for connecting A500 to SCART | VENERE::ZABOT | Marco Zabot-Adv.Tech.mgr-Turin ACT | Tue Nov 17 1987 11:15 | 31 |
| yes, I can help.
1st. You can order it to DESME Amiga Club, (011) 592551. It costs
about 35-50 KLit. Tell them you're a Digital employee and ask for
the special discount. They will send it by mail and you should get
it in few days.
2nd. Do it yourself.
This is the schema:
---------------------------
==> \ y g y . . . . x agr y | =====> x y are audio chnls.
| \ . o bl br w r gy bk . .| agr is audio ground
| -------------------------
|the yellow are jumpered together.
the others go to the 23 female as follow:
------------------------------
\ . . bl w bk . . . . y . . /
\ . . . br r gy g o . . . /
--------------------------
Pins are seen from the soldering side !
It will be hard to find the 23 pins connector. You can do it yourself
by sawing out two external pins of a regular 25 pins connector.
Good luck ... and enjoy a colorfull A500.
ciao.
marco
|