| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 1102.1 | "CONSOLE$DEBUG" | 29067::D_DONOVAN | SummaNulla(The High Point of Nothing) | Mon Nov 20 1995 11:33 | 9 |
| Hi Geert,
Have you tried (for a starter):
$DEFINE/SYS/EXE CONSOLE$DEBUG TRUE,DAEMON,ENS
...then stop/restart PCM. Look at the log files in "CONSOLE$TMP:".
Dennis
|
| 1102.2 | | 54625::WILLEMSG | Geert Willems MCS-Belgium | Tue Nov 21 1995 11:14 | 9 |
|
Dennis,
Of course I did that. This doesn't help.
Thanks for trying.
Geert
|
| 1102.3 | | 29067::BUTTERWORTH | Gun Control is a steady hand. | Wed Nov 22 1995 12:43 | 6 |
| When you go into MONITOR and view the pseudo-node and use the PREV/NEXT
keys what do you see? Do you by cchance see an "@" sign after the echo
of a some commands or what?
Regs,
dan
|
| 1102.4 | PCM cannot open channel to command procedure | 54831::STEUKERS | | Thu Dec 07 1995 04:25 | 207 |
| Dan,
Geert WILLEMS posted this problem for me when still being a DIGITAL employee.
Geert now works for the customer that "has" this FT problem.
I'm providing consulting from time to time to this customer and will
followup the problem from now.
A CONSOLE MONITOR MAROPR gives the following:
14:00:45
14:00:45 MAROPR > @
17:29:17 MAROPR > @
17:36:34 MAROPR > @
17:44:49 MAROPR > @
*MAROPR - Management platform | Tue Nov 28 1995 | Console Active
Command:
The following output shows the definition of system MAROPR and
the proof the command procedure is visible to RMS.
System@MAROPR>console edit/inter=char
POLYCENTER Console Manager
Character Cell Editor Version V1.6-110
Copyright (c) 1995 Digital Equipment Corporation. All Rights Reserved
Database contains NO verification errors
PCM Edit> sh system maropr
Full or Brief listing? [f=full, b=brief] (b): f
Output file (SYS$OUTPUT):
System Name = MAROPR
Information = Management platform
Connection = Pseudo-Terminal
Command = @sys$common:[sysmgr]CONSOLE_OPR.COM
Scan Profile = SCAN$MAROPR Martorell Management system
Icon filename = VAXSTATION_3100.XBM
Console line = Enabled
Logging is enabled, directory = CONSOLE$LOGFILES
PCM Edit>
PCM Edit>
PCM Edit> exit
System@MAROPR>type sys$common:[sysmgr]CONSOLE_OPR.COM
$ set noon
$ REPLY/USER=SYSTEM "Arrived well in CONSOLE_OPR.COM"
$top:
$ set term/broadcast/width=255
$ reply/enable
$ wait 23:59:59
$ goto top
System@MAROPR>
System@MAROPR>dir console$tmp:
Directory DISK$APPLICATIONS:[CONSOLE-TEMP]
CONSOLE$DAEMON.COM;1
1 28-NOV-1995 17:42:40.35
CONSOLE$DAEMON.LOG;1
1 28-NOV-1995 17:42:40.64
CONSOLE$ENS_DAEMON.COM;1
1 28-NOV-1995 17:42:45.47
CONSOLE$ENS_DAEMON.LOG;1
2 28-NOV-1995 17:42:45.83
CONSOLE_CFG.DAT;1 193 28-NOV-1995 17:42:42.59
CONTROLLER_01.COM;1
1 28-NOV-1995 17:42:49.34
CONTROLLER_01.LOG;1
1 28-NOV-1995 17:42:49.83
_MAROPR$FTA20.COM;1
1 28-NOV-1995 17:44:15.79
Total of 8 files, 201 blocks.
System@MAROPR>
System@MAROPR>
System@MAROPR>type DISK$APPLICATIONS:[CONSOLE-TEMP]_MAROPR$FTA20.COM;1
$ CMGR_VERIFY = F$VERIFY(0)
$ Set NoOn
$ Set NoControl=(Y,T)
$ LOGOUT :== LOGOUT
$ Set Terminal/Typeahead
$ CM_PseudoStart:
$ DEFINE /USER SYS$INPUT SYS$COMMAND
$ @sys$common:[sysmgr]CONSOLE_OPR.COM
$ If .NOT. ($STATUS .AND. 1) Then Goto CM_PseudoError
$ Goto CM_PseudoStart
$ CM_PseudoError:
$ CMGR_VERIFY = F$VERIFY(CMGR_VERIFY)
$ LOGOUT/FULL
System@MAROPR>
The follwong text shows that COnsole Manager is not able to
open a channel to the command procedure.
ANAL/SYSTEM
-----------------------
Extended Indx Process name Username State Pri PCB PHD Wkset
-- PID -- ---- --------------- ----------- ------- --- -------- -------- ------
00000138 0038 CPT$SNS_detach SYSTEM HIB 6 81723800 820EA000 57
00000139 0039 SNS$CONS_447 SYSTEM HIB 5 8173D540 82853800 135
0000013A 003A MAROPR SYSTEM LEF 4 81730A40 82B4A800 49
0000013D 003D MANAGER 002 SYSTEM LEF 8 8174B680 824FDA00 5330
000000C6 0046 SYSTEM SYSTEM LEF 4 816E6FC0 82795C00 67
000000C7 0047 _FTA10: SYSTEM CUR 7 816DBC00 827F4A00 1644
000000CA 004A SYSTEM_2 SYSTEM HIBO 8 817293C0 00000000 61
000000CB 004B _FTA12: SYSTEM LEF 4 8171E180 81F6E800 62
000000CD 004D _FTA13: SYSTEM LEF 9 8171DA00 8249EC00 174
000000DF 005F SYSTEM_5 SYSTEM HIB 8 8173BEC0 81CD6600 62
SDA> sh proc/ind=003A/chan
Process index: 003A Name: MAROPR Extended PID: 0000013A
-----------------------------------------------------------
Process active channels
-----------------------
Channel Window Status Device/file accessed
------- ------ ------ --------------------
0010 00000000 DKA100:
0040 815C9300 DKA100:[SYSCOMMON.SYSEXE]DCL.EXE;1 (sect
ion file)
0060 815CF100 DKA100:[SYSCOMMON.SYSLIB]DCLTABLES.EXE;2
3 (section file)
0080 00000000 Busy FTA20:
0090 00000000 FTA20:
SDA>
On my system I have exact the same version of VMS, PCM and similar FTA
procedure. SDA is showing three channels:
Process index: 002C Name: BRH925 Extended PID: 202000AC
-----------------------------------------------------------
Process active channels
-----------------------
Channel Window Status Device/file accessed
------- ------ ------ --------------------
0010 00000000 DSA0:
0020 81E03B40 DSA0:[SYSCOMMON.SYSMGR]CONSOLE_BRH925.COM;20
0040 81D59400 DSA0:[SYSCOMMON.SYSEXE]DCL.EXE;1
(section file)
0060 81D7AB80 DSA0:[SYSCOMMON.SYSLIB]DCLTABLES.EXE;64
(section file)
0080 00000000 FTA1:
0090 00000000 FTA1:
SDA>
{BRH925} $ type SYS$COMMON:[SYSMGR]CONSOLE_BRH925.COM
$ set noon
$ set ver
$ reply/user=SYSTEM "arrived well in CONSOLE_BRH925.COM"
$top:
$ set term/broadcast/width=511/perm
$ reply/enable
$ wait 23:59:59
$ goto top
$ EXIT
$ TT_DEVNAME = F$TRNLNM("TT")
$! IMAGNAME = F$GETJPI("","IMAGNAME")
$ MASTERPID = F$GETJPI("","MASTER_PID")
$ OPEN/APPEND OUTFILE CPT$TMP:GETIT.TXT
$ WRITE OUTFILE TT_DEVNAME
$! WRITE OUTFILE IMAGNAME
$ WRITE OUTFILE MASTERPID
$ CLOSE OUTFILE
{BRH925} $
|
| 1102.5 | | 29067::BUTTERWORTH | Gun Control is a steady hand. | Wed Dec 13 1995 15:49 | 5 |
| You have also proven that it must be an environmental problem at this
customer site by virtue of the fact that it works for you. I contend they
still have some login procedure or some such that is causing this problem.
*ANY* SET TERMINAL command in any of these procedures will cause this
problem.
|