| Title: | POLYCENTER Console Manager |
| Notice: | Kits, Scans, Docs on CSC32:: as PCM$KITS:,PCM$DOCS:, PCM$SCANS: |
| Moderator: | CSC32::BUTTERWORTH |
| Created: | Thu Aug 06 1992 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 1541 |
| Total number of notes: | 6564 |
A customer reported the following two problems using PCM V1.6-110
under OpenVMS VAX V5.5-2.
######################################################################
1. Non-provileged VMS-user has PCM access through a group. Executing
the following command gives an ACCVIO.
$ console watch/out=file.tmp hddL27 [F10]
POLYCENTER Console Manager
Watch facility Version V1.6-100
Copyright (c) 1995 Digital Equipment Corporation. All Rights Reserved
%SYSTEM-F-ACCVIO, access violation, reason mask=00, virtual
address=00000000, PC=000744C0, PSL=0BC00000
Improperly handled condition, image exit forced.
Signal arguments Stack contents
Number = 00000005 00008694
Name = 0000000C 00000000
00000000 27FC0000
00000000 7FEA21B4
000744C0 7FEA217C
0BC00000 000747C0
00000073
0000000B
000B83D0
0000234E
######################################################################
2. The second problem occurs trying to send CTRL/P over a TCP/IP
connection.
POLYCENTER Console Manager
Connect/Monitor Interface V1.6-110
Connected to remote console (bsdw01)
Type CTRL/E to exit or CTRL/G to escape to monitor
RTDW02 (VAX 26.14)
Ongeautoriseerde toegang tot dit systeem is verboden
Username:
Do you want to transmit a break? [Y/N] y
%SYSTEM-F-ACCVIO, access violation, reason mask=00, virtual
address=0000002C, PC=0000B5F1, PSL=03C00004
Improperly handled condition, image exit forced.
Signal arguments Stack contents
Number = 00000005 00000000
Name = 0000000C 00000000
00000000 20000000
0000002C 7FEA33B8
0000B5F1 7FEA3388
03C00004 0000B6AC
00000003
00149230
00129D60
00000001
Any suggestions ?
Gerard Zwinkels
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 1031.1 | 29067::BUTTERWORTH | Gun Control is a steady hand. | Wed Oct 11 1995 16:10 | 57 | |
> 1. Non-provileged VMS-user has PCM access through a group. Executing
> the following command gives an ACCVIO.
>
> $ console watch/out=file.tmp hddL27 [F10]
> POLYCENTER Console Manager
> Watch facility Version V1.6-100
> Copyright (c) 1995 Digital Equipment Corporation. All Rights Reserved
> %SYSTEM-F-ACCVIO, access violation, reason mask=00, virtual
> address=00000000, PC=000744C0, PSL=0BC00000
> Improperly handled condition, image exit forced.
> Signal arguments Stack contents
> Number = 00000005 00008694
> Name = 0000000C 00000000
> 00000000 27FC0000
> 00000000 7FEA21B4
> 000744C0 7FEA217C
> 0BC00000 000747C0
> 00000073
> 0000000B
> 000B83D0
> 0000234E
>
I can't reproduce this one. I'll have to check the code to see what
it was trying to do.
> ######################################################################
> 2. The second problem occurs trying to send CTRL/P over a TCP/IP
> connection.
> POLYCENTER Console Manager
> Connect/Monitor Interface V1.6-110
> Connected to remote console (bsdw01)
> Type CTRL/E to exit or CTRL/G to escape to monitor
> RTDW02 (VAX 26.14)
> Ongeautoriseerde toegang tot dit systeem is verboden
> Username:
> Do you want to transmit a break? [Y/N] y
The first issue here is that ctrl-p is set to be the break key so
it's not trying to send a ctrl-p so it wouldn;t have halted the system
anyway. So set your break key to somehting other than ctrl-p. And for
those systems that do need a break to be sent I fixed this problem and
the solution is available via
CSC32::DUMPS:[BUTTERWORTH.PCM]CONSOLE$DAEMON_FIX_TELNET_BREAK.EXE;1
Regards,
Dan
| |||||
| 1031.2 | Do you need more information ? | 54687::ZWINKELS | Tue Nov 07 1995 06:59 | 6 | |
Hi Dan,
Is there any news yet about the ACCVIO on the $console watch/out=file.tmp
If you need additional information, I'll gladly supply it.
Gerard Zwinkels
| |||||
| 1031.3 | 29067::BUTTERWORTH | Gun Control is a steady hand. | Thu Nov 09 1995 16:39 | 14 | |
Unfortunately no. The PC's inthe ACCVIO in .0 are outside the
CONSOLE$WATCH main image so we can't tell what CONSOLE$WATCH was trying
to do. Since this is reproducible you could do the following:
$ install remove console$image:console$watch
$ set process/dump
Now make the problem reoccur and you will have a CONSOLE$WATCH.DMP in
your current directory. I would like you to go ahead an IPMT this
(for tracking purposes) and make the dumpfile available ont he E-net.
Regs,
Dan
| |||||