[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference csc32::consolemanager

Title:POLYCENTER Console Manager
Notice:Kits, Scans, Docs on CSC32:: as PCM$KITS:,PCM$DOCS:, PCM$SCANS:
Moderator:CSC32::BUTTERWORTH
Created:Thu Aug 06 1992
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:1541
Total number of notes:6564

784.0. "1.6-009 only displays default icons" by CX3PST::ANASAZ::J_BECKER (There's no substitute for a good boot) Mon Jun 05 1995 20:08

I installed 1.6-009 and configured a telnet node to use the VAXSTATION_3100.XBM icon.
I also had a second node icon for watchdog supplied by the sns software.  When the C3 is
started, the icons are not loaded and only the default box is displayed. I set the xqp
debug flag and see the file is touched:

.
.
.
%XQP, Thread #0, Access DECW$BKRSHR12.EXE;1 (2214,1,0) Status: 00000001
%XQP, Thread #0, Deaccess (2214,1,0) Reads: 1, Writes: 0, Status: 00000001
%XQP, Thread #0, Access CONSOLE_CFG.DAT;3 (3384,6,0) Status: 00000001
%XQP, Thread #0, Deaccess (3384,6,0) Reads: 9, Writes: 0, Status: 00000001
%XQP, Thread #0, Access  (0,0,0) Status: 00000910
%XQP, Thread #0, Access VAXSTATION_3100.XBM;3 (3851,1,0) Status: 00000001
%XQP, Thread #0, Deaccess (3851,1,0) Reads: 1, Writes: 0, Status: 00000001
%XQP, Thread #0, Access WDOG.XBM;1 (3382,3,0) Status: 00000001
%XQP, Thread #0, Deaccess (3382,3,0) Reads: 37, Writes: 0, Status: 00000001
.
.
.

I then enabled the C3 flag in the console debugger and see the following:

C3: DEBUG enabled
C3: Display name = _WSA8:
C3: Setting up Motif
C3: Initing CM icon
C3: Turning on XSynchronize
POLYCENTER Console Manager
C3: HOME defined as sys$sysroot:[sysmgr]
C3: Message log filename = sys$sysroot:[sysmgr]CONSOLE$C3_SYSTEM_msg.log
C3: Mon Jun  5 12:43:11 1995:  POLYCENTER Console Manager
C3 Version T1.6-009
C3: Mon Jun  5 12:43:12 1995:  C3 Version T1.6-009
Copyright (c) 1995 Digital Equipment Corporation. All Rights Reserved

C3: Mon Jun  5 12:43:12 1995:  Copyright (c) 1995 Digital Equipment Corporationd
C3: Mon Jun  5 12:43:12 1995:  C3 Startup ...
C3: Mon Jun  5 12:43:12 1995:
C3: data filename: CONSOLE$C3.DAT
C3: imex data filename: (null)
C3: reading database from file sys$sysroot:[sysmgr]CONSOLE$C3.DAT
C3: Setting default values
    1 priority color = Red
    2 priority color = Magenta
    3 priority color = Orange
    4 priority color = Yellow
    5 priority color = Green
    6 priority color = LightBlue
C3: Cannot open C3 database file sys$sysroot:[sysmgr]CONSOLE$C3.DAT for reading
C3: no such file or directory
C3: Mon Jun  5 12:43:13 1995:  Cannot open C3 database file sys$sysroot:[sysmgrg
C3:                                               no such file or directory
C3: setting MDS default values
C3: default mds.main_group.x = 366  mds.main_group.y = 243

C3: Command line arguments
    Arg[0]: $1$dka500:[console.][images]console$c3.exe
    Arg[1]: c3

C3: Mon Jun  5 12:43:16 1995:  Display: _WSA8:
C3: Drawing all known peripheral icons
C3: Drawing all text (0)
C3: Connecting to CM daemon
C3: Initing shared memory

C3: Priviledges
    Archive .....: 1
    Exit ........: 1
    NoEdit ......: 1
    Reconfigure .: 1
    Send break ..: 1
    Shutdown ....: 1
    Startup .....: 1
    Unlock ......: 1

C3: Reconfigure...

C3: PCM database dump
    All Systems (2):
        TMBLWD
        wdog
    Main Window systems:
        TMBLWD
        wdog
    Group names (0):

C3: parse c3 dbase
C3: parse c3 dbase
C3: icon remove all
C3: group remove all
C3: Drawing all group icons
C3: Drawing all system icons, state=1
C3: Drawing all group icons
C3: Drawing all system icons, state=2
C3: Drawing new system icon TMBLWDC3: In lowest drawing point children=0
Create icon (TMBLWD)
C3: Drawing new system icon wdogCreate icon (wdog)

C3: Priviledges
    Archive .....: 1
    Exit ........: 1
    NoEdit ......: 1
    Reconfigure .: 1
    Send break ..: 1
    Shutdown ....: 1
    Startup .....: 1
    Unlock ......: 1

C3: Mon Jun  5 12:43:21 1995:  C3 Connected to ENS
C3: Console Event list spawn command:
    C3 create CONSOLE EVENTLIST -
        /NODE="ANASAZ" -
        /SERVER=0 -
        /SCREEN=0 -
        /TRANSPORT=DECNET
        /C3

C3: Spawn command = CONSOLE EVENTLIST/NODE="ANASAZ"/SERVER=0/SCREEN=0/TRANSPORT3
C3: Spawn command length = 69
C3: Spawn command status = 1
C3: Spawn command pidadr(7fee7304) = 000001E4

C3: Event list pid = 000001E4
POLYCENTER Console Manager
Eventlist Version T1.6-009
Copyright (c) 1995 Digital Equipment Corporation. All Rights Reserved


I then did a "save" from the c3 and restarted it.  Now I see the following debug info:

C3: DEBUG enabled
C3: Display name = _WSA8:
C3: Setting up Motif
C3: Initing CM icon
C3: Turning on XSynchronize
POLYCENTER Console Manager
C3: HOME defined as sys$sysroot:[sysmgr]
C3: Message log filename = sys$sysroot:[sysmgr]CONSOLE$C3_SYSTEM_msg.log
C3: Mon Jun  5 12:57:44 1995:  POLYCENTER Console Manager
C3 Version T1.6-009
C3: Mon Jun  5 12:57:45 1995:  C3 Version T1.6-009
Copyright (c) 1995 Digital Equipment Corporation. All Rights Reserved

C3: Mon Jun  5 12:57:45 1995:  Copyright (c) 1995 Digital Equipment Corporationd
C3: Mon Jun  5 12:57:45 1995:  C3 Startup ...
C3: Mon Jun  5 12:57:45 1995:
C3: data filename: CONSOLE$C3.DAT
C3: imex data filename: sys$sysroot:[sysmgr]CONSOLE$C3.DAT
C3: reading database from file sys$sysroot:[sysmgr]CONSOLE$C3.DAT
C3: Setting default values
    1 priority color = Red
    2 priority color = Magenta    3 priority color = Orange
    4 priority color = Yellow
    5 priority color = Green
    6 priority color = LightBlue

C3: header dump
    X ........................: 366
    Y ........................: 243
    Width ....................: 547
    Height ...................: 538
    Pane1_height .............: 402
    Pane2_height .............: 538
    H scroll bar .............: 0
    V Scroll bar .............: 0
    Background ...............: 2
    Autostart Event List .....: 1
    Iconify at startup .......: 0
    Critical color ...........: 27
    Critical bell count ......: 1
    Critical bell volume .....: 50
     Major color ..............: 48
    Major bell count .........: 1
    Major bell volume ........: 50
    Minor color ..............: 49
    Minor bell count .........: 1
    Minor bell volume ........: 50
    Warn color ...............: 22
    Warn bell count ..........: 1
    Warn bell volume .........: 50
    Clear color ..............: 50
    Clear bell count .........: 1
    Clear bell volume ........: 50
    Indeterminate color ......: 51
    Indeterminate bell count .: 1
    Indeterminate bell volume : 50
    Keep highest Priority ....: 0
    ENS Timer ................: 30
    System Double Click option: 0


    name            = TMBLWD
    info            =
    bitmap filename = ?				<-----
    x               = 10
    y               = 68
    break key       = P
    escape          = G
    exit            = E
    refresh         = W
    override icon   = n
    label placement = n

    name            = wdog
    info            =
    bitmap filename = ?				<-----
    x               = 94
    y               = 10
    break key       = P
    escape          = G
    exit            = E
    refresh         = W
    override icon   = n
    label placement = n
C3: setting MDS default values

C3: Command line arguments
    Arg[0]: $1$dka500:[console.][images]console$c3.exe
    Arg[1]: c3

C3: Mon Jun  5 12:57:53 1995:  Display: _WSA8:
C3: Drawing all known peripheral icons
C3: Drawing all text (0)
C3: Connecting to CM daemon
C3: Initing shared memory

C3: Priviledges
    Archive .....: 1
    Exit ........: 1
    NoEdit ......: 1
    Reconfigure .: 1
    Send break ..: 1
    Shutdown ....: 1
    Startup .....: 1
    Unlock ......: 1

C3: Reconfigure...

C3: PCM database dump
    All Systems (2):
        TMBLWD
        wdog
    Main Window systems:
        TMBLWD
        wdog
    Group names (0):

C3: parse c3 dbase
C3: parse c3 dbase
C3: icon remove all
C3: group remove all
C3: Drawing all group icons
C3: Drawing all system icons, state=1
Create icon (TMBLWD)
C3: Mon Jun  5 12:57:55 1995:  Cannot load bitmap file ?, using default
Create icon (wdog)
C3: Mon Jun  5 12:57:56 1995:  Cannot load bitmap file ?, using default
C3: Drawing all group icons
C3: Drawing all system icons, state=2

C3: Priviledges
    Archive .....: 1
    Exit ........: 1
    NoEdit ......: 1
    Reconfigure .: 1
    Send break ..: 1
    Shutdown ....: 1
    Startup .....: 1
    Unlock ......: 1

C3: Mon Jun  5 12:57:58 1995:  C3 Connected to ENS
C3: Console Event list spawn command:
    C3 create CONSOLE EVENTLIST -
        /NODE="ANASAZ" -
        /SERVER=0 -
        /SCREEN=0 -
        /TRANSPORT=DECNET
        /C3

C3: Spawn command = CONSOLE EVENTLIST/NODE="ANASAZ"/SERVER=0/SCREEN=0/TRANSPORT3
C3: Spawn command length = 69
C3: Spawn command status = 1
C3: Spawn command pidadr(7fee7304) = 000001D9

C3: Event list pid = 000001D9
POLYCENTER Console Manager


It appears the editor settings are not being used.  Is this expected or have I overlooked
anything?  If not expected, can we fix this?

thanks
john becker
T.RTitleUserPersonal
Name		DateLines
784.1fixed in 1.6-011CX3PST::ANASAZ::J_BECKERThere&#039;s no substitute for a good bootMon Jun 05 1995 21:271
see title