| Title: | POLYCENTER Console Manager |
| Notice: | Kits, Scans, Docs on CSC32:: as PCM$KITS:,PCM$DOCS:, PCM$SCANS: |
| Moderator: | CSC32::BUTTERWORTH |
| Created: | Thu Aug 06 1992 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 1541 |
| Total number of notes: | 6564 |
Question,
I would like to setup a PCM configuration in which PCM monitors it's
own syslog messages.
The system is running ULTRIX V4.3, PCM V1.5.
I tried some of the hints i picked up in note 593, but i can't get it
to work.
This is what i have done sofar,
In the configuration editor i created a system called dcuws2 and
assigned it a pseudo terminal.
In the command section i entered 'tail /usr/spool/mqueue/syslog'
Database verication gives no errors.
But after reconfiguring the icon comes up grey and from the system
status i read 'Open Failure'
Any hints would be much appriciated,
Arthur.
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 700.1 | Try -f option | ZENDIA::DBIGELOW | Innovate, Integrate, Evaporate | Fri Apr 28 1995 14:17 | 10 |
Arthur,
try 'tail -f /usr/spool/mqueue/syslog'
Without the -f option, the tail program just exits in the
pseudoterminal and PCM gathers from this that it has lost the
connection. The -f option causes the tail ptogram not to terminate.
Dave
| |||||
| 700.2 | Solution ... | IJSAPL::SINKE | Fri Apr 28 1995 15:09 | 12 | |
Dave,
You're right about the missing -f switch.
But this wasn't the real problem. In the meanwhile i found that a
absolute path to the tail command had to be provided.
Thus : "/usr/ucb/tail -f /usr/spool/mqueue/syslog" is the correct
command to enter.
Thanks,
Arthur
| |||||