| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 615.1 | | PBUNIX::pgb | And through the square window... | Thu Feb 16 1995 10:59 | 8 |
| Geert,
You shouldnt need to do this for PCM, the software should do this
for you automatically
Cheers,
Phil
|
| 615.2 | | CSC32::BUTTERWORTH | Gun Control is a steady hand. | Fri Feb 17 1995 20:10 | 11 |
|
> You shouldnt need to do this for PCM, the software should do this
> for you automatically
Uhhh Phil, it can't do it automatically as the command is issued
against the OPA0 device on the service nodes not the local LTA/TXA
ports.
Regs,
Dan
|
| 615.3 | still needed ? | BACHUS::WILLEMSG | Geert Willems MCS-Belgium | Mon Feb 20 1995 08:50 | 11 |
|
Hi Phil, Dan,
So, the set terminal opa0//// is still needed ?
This is very bad news because a customer with more than 50 nodes
asked this question last week and said to change (delete the 'set
terminal) as I passed him the feedback you gave to me Phil.
Rgds,
Geert
|
| 615.4 | | OPG::PHILIP | And through the square window... | Mon Feb 20 1995 10:39 | 13 |
| Geert,
I am sorry, I misread your note, I thought you were talking about the
connections on the PCM host!!
Anyway, I dont actually perorm that set command on any of the VMS systems
I manage here with PCM, I havnt had any problems not doing it, that doesnt
mean that it will be OK for your customer though, however, I would suggest
that if your customer has problems then they should replace this command
in their system startup.
Cheers,
Phil
|