[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference csc32::consolemanager

Title:POLYCENTER Console Manager
Notice:Kits, Scans, Docs on CSC32:: as PCM$KITS:,PCM$DOCS:, PCM$SCANS:
Moderator:CSC32::BUTTERWORTH
Created:Thu Aug 06 1992
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:1541
Total number of notes:6564

339.0. "DIALOG output of commands AND results." by 54455::RIJSBERGEN_M (Marcel Rijsbergen @uto) Mon Aug 08 1994 11:42

    Hello,
    
    in PCM there is a way to send information to the console line using
    scripts. This is called CONSOLE DIALOG, right.
    
    I would like to see what is happening. When I do a /noquiet I see the
    commands being executed but not the output of what is happening. The
    procedure is telling me 'WAIT timed out at line x'. I do not want to
    use 'CONNECT node' to test this everytime but just want to see what is
    happening right now. Can't find a qualifier in HELP DIALOG or in
    chapter 6.1.13 which forces this.
    
    Regards, Marcel.
T.RTitleUserPersonal
Name		DateLines
339.129067::BUTTERWORTHGun Control is a steady hand.Mon Aug 08 1994 17:368
    What version are you running? This problem was reported against 1.1
    and has been fixed in 1.5. Also, are you specifying a delta time on
    your wait command or simply a number of seconds? It should be the
    latter. Also the parser doesn't report the fact that you specified a 
    delta time.
    
    Regs,
       Dan
339.2Sorry ANALYZE tells me V1.5-000UTROP1::RIJSBERGEN_MMarcel Rijsbergen @utoThu Aug 11 1994 08:0310
    Dan,
    
    the ANALYZE/IMAGE of several .EXE's say V1.5-000 and CONSOLE EDIT
    /INTER=CHAR tells me V1.5-000 too. The WAIT is in 10, 5, 20 etc. so in
    seconds. I have to specify /NOQUIET to see the commands coming by else
    nothing happens at all. Can't /NOQUIET be the default.
    
    ????
    
    Regards, Marcel.
339.3OPG::PHILIPAnd through the square window...Thu Aug 11 1994 09:5113
Marcel,

  If you are seeing the commands when specifying the
  /NOQUIET qualifier then you are seeing the intended
  behaviour. I plan on changing this for the next
  release so that you get to see the actual console 
  output as well. I will change the default to
  /NOQUIET as it doesnt seem to me as if it will
  cause any existing users any pain.

Cheers,
Phil
339.4..Ok, ..but still need the system output.UTROP1::RIJSBERGEN_MMarcel Rijsbergen @utoMon Aug 15 1994 07:438
    Phil,
    
    OK, but still I would like to see what the output of the system is.
    Just the echoing of the commands and no visible results of what the
    system is doing is a bit annoying when trying to 'debug' a DIALOG file.
    
    Regards, Marcel.
339.5OPG::PHILIPAnd through the square window...Mon Aug 15 1994 09:5719
Marcel,

  Sorry I didnt make myself clear...

  V.next will have the following behaviour:

  /NOQUIET is the default

  All output from the managed console will be
  displayed along with any commands in the DIALOG
  file as they are executed.

  NOTE: V.next is the next major release of the
        software, there are too many changes
        required to do this in a patch kit for V1.5.


Cheers,
Phil