Conference csc32::consolemanager

136.0. "Event Notify process ACCVIO after RECONFIG." by CSC32::BUTTERWORTH () Tue Nov 23 1993 23:55

    CONS RECONF produces ACCVIO on the Console Notify process as follows
    from the logfile with CONSOLE$DEBUG turned on:
    
$!
$! This command procedure is always run when anybody on the entire system
$! logs in. It is equivalent to LOGIN.COM except that the instructions
$! contained herein are executed everytime anyone on the VMS system
$! logs in to their account.
$!
$! For interactive processes, turn on Control T, and set the terminal type
$!
$ IF (F$MODE() .EQS. "INTERACTIVE") THEN SET CONTROL=T
$ IF (F$MODE() .EQS. "INTERACTIVE") THEN SET TERMINAL/INQUIRE
$!
$! For MicroVAX systems only, use the command MOUNT/NOASSIST.
$!
$ IF (.NOT. F$TRNLNM("SYS$MICROVAX")) THEN GOTO SKIP_MICROVAX_COMMANDS
$ MOU*NT :== MOUNT/NOASSIST
$ SKIP_MICROVAX_COMMANDS:
$!
$! Place your site-specific LOGIN commands below
$!
$@sys$manager:sls$tapsymbol
$!*  COPYRIGHT (c) 1992 BY DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASSACHUSETTS.
$!
$       SET MESSAGE /FACILITY /IDENTIFICATION /SEVERITY /TEXT
$       SET DEFAULT CONSOLE$TMP:
$       SET PROCESS /DUMP
$ RUN CONSOLE$IMAGE:CONSOLE$ENS_DAEMON.EXE
Got to line 4762 in CM$DEV_BASE:[BUILD.SOURCES]CM_SOCKET.C;514 in process 544
Got to line 4766 in CM$DEV_BASE:[BUILD.SOURCES]CM_SOCKET.C;514 in process 544
At line 4771 in CM$DEV_BASE:[BUILD.SOURCES]CM_SOCKET.C;514 in process 544
     listener_socket->iosb[2] is: 0
At line 4772 in CM$DEV_BASE:[BUILD.SOURCES]CM_SOCKET.C;514 in process 544
     listener_socket->iosb[3] is: 0
At line 4777 in CM$DEV_BASE:[BUILD.SOURCES]CM_SOCKET.C;514 in process 544
     listener_socket->iosb[2] is: 221
At line 4778 in CM$DEV_BASE:[BUILD.SOURCES]CM_SOCKET.C;514 in process 544
     listener_socket->iosb[3] is: 0
Got to line 4762 in CM$DEV_BASE:[BUILD.SOURCES]CM_SOCKET.C;514 in process 544
Got to line 4766 in CM$DEV_BASE:[BUILD.SOURCES]CM_SOCKET.C;514 in process 544
At line 4771 in CM$DEV_BASE:[BUILD.SOURCES]CM_SOCKET.C;514 in process 544
     listener_socket->iosb[2] is: 0
At line 4772 in CM$DEV_BASE:[BUILD.SOURCES]CM_SOCKET.C;514 in process 544
     listener_socket->iosb[3] is: 0
At line 4777 in CM$DEV_BASE:[BUILD.SOURCES]CM_SOCKET.C;514 in process 544
     listener_socket->iosb[2] is: 222
At line 4778 in CM$DEV_BASE:[BUILD.SOURCES]CM_SOCKET.C;514 in process 544
     listener_socket->iosb[3] is: 0
Got to line 4762 in CM$DEV_BASE:[BUILD.SOURCES]CM_SOCKET.C;514 in process 544
Got to line 4766 in CM$DEV_BASE:[BUILD.SOURCES]CM_SOCKET.C;514 in process 544
At line 4771 in CM$DEV_BASE:[BUILD.SOURCES]CM_SOCKET.C;514 in process 544
     listener_socket->iosb[2] is: 0
At line 4772 in CM$DEV_BASE:[BUILD.SOURCES]CM_SOCKET.C;514 in process 544
     listener_socket->iosb[3] is: 0
At line 4777 in CM$DEV_BASE:[BUILD.SOURCES]CM_SOCKET.C;514 in process 544
     listener_socket->iosb[2] is: B9
At line 4778 in CM$DEV_BASE:[BUILD.SOURCES]CM_SOCKET.C;514 in process 544
     listener_socket->iosb[3] is: 0
Got to line 4762 in CM$DEV_BASE:[BUILD.SOURCES]CM_SOCKET.C;514 in process 544
Got to line 4766 in CM$DEV_BASE:[BUILD.SOURCES]CM_SOCKET.C;514 in process 544
At line 4771 in CM$DEV_BASE:[BUILD.SOURCES]CM_SOCKET.C;514 in process 544
     listener_socket->iosb[2] is: 0
At line 4772 in CM$DEV_BASE:[BUILD.SOURCES]CM_SOCKET.C;514 in process 544
     listener_socket->iosb[3] is: 0
At line 4777 in CM$DEV_BASE:[BUILD.SOURCES]CM_SOCKET.C;514 in process 544
     listener_socket->iosb[2] is: 23A
At line 4778 in CM$DEV_BASE:[BUILD.SOURCES]CM_SOCKET.C;514 in process 544
     listener_socket->iosb[3] is: 0
%SYSTEM-F-ACCVIO, access violation, reason mask=00, virtual address=00000000, PC=0027AE8E, PSL=0BC00000

  Improperly handled condition, image exit forced.

	Signal arguments	      Stack contents

	Number = 00000005		 00000000
	Name   = 0000000C		 20000000
		 00000000		 7FEE8B78
		 00000000		 7FEE8B5C
		 0027AE8E		 0000747E
		 0BC00000		 00000001
					 00000000
					 002CE728
					 00000000
					 00000000

	Register dump

	R0 = 0600FFFF  R1 = 00000000  R2 = 0000000A  R3 = 00000200
	R4 = 00000001  R5 = 00000200  R6 = 00000200  R7 = 7FFED188
	R8 = 7FFECA4C  R9 = 7FFECC54  R10= 7FFED7D4  R11= 7FFE2BDC
	AP = 7FEE8AD0  FP = 7FEE8A90  SP = 7FEE8B0C  PC = 0027AE8E
	PSL= 0BC00000

    
    
  SYSTEM       job terminated at 23-NOV-1993 16:44:43.35

  Accounting information:
  Buffered I/O count:             219         Peak working set size:    1908
  Direct I/O count:               137         Peak page file size:      8622
  Page faults:                   1849         Mounted volumes:             0
  Charged CPU time:           0 00:00:02.15   Elapsed time:     0 00:07:35.82
    
    The setup is very minimalistic. I have one emulated console - whose
    command is SET HOST/LAT/DISC=K SSTIS1 to connect to an infoserver. This
    doesn't work either as I wind up with a DCL prompt instead of a
    password prompt to access the infoserver. The password prompt doesn't
    time out so that isn't the problem here. The accvio occurrs after
    a reconfig. The only filter/action setup I have is one called
    WILDCARD to send the multi-line window to 2 nodes for all events and
    all systems. 
    
    Regs,
      Dan
    

Dan,

  I assume you are using a Pseudo terminal connection, if so, we are just 
  ironing out a few problems we found yesterday!!

  As for the ens problem, is it reproducable, if so, can you define the
  console$debug logical to contain the string "ENS" (it is case sensitive)
  then mail me the log file from that (it will probably be too long to post
  here.

Cheers,
Phil

    
    >As for the ens problem, is it reproducable, if so, can you define the
    >console$debug logical to contain the string "ENS" (it is case
    >sensitive)
    >then mail me the log file from that (it will probably be too long to
    >post here.
    
    Reproducible at will. I'll create that logfile. If you want a process
    dump I can create that too.
    
    Regs,
      Dan