| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 362.1 | Here's hoping | CURRNT::DAVIES | Close, but no banana. | Thu Jul 05 1990 10:29 | 10 |
| Nigel,
Dunno if this'll work but...
when you stick the /node qualifer in try:
/NODE=bootserver::workstation::
Keith.
|
| 362.2 | | OVAL::MACMILLANR | So many roads, so little time | Thu Jul 05 1990 10:43 | 9 |
|
To get a process to talk to your DECwindow use the -
$ SET DISPLAY/CREATE/NODE=<your node>/TRANS=DECNET
Also make sure you allow the remote process to access your system by
adding a definition with the Security option of the Customize menu.
Rob
|
| 362.3 | forgot to say....... | CUCKOO::SPENCER | | Thu Jul 05 1990 11:05 | 3 |
| This is from an ultrix system, not a vms one.
Nigel
|
| 362.4 | | SOOTY::CHAMBERS | I'll go mad and have the Beef | Thu Jul 05 1990 14:37 | 7 |
| -dxterm -d -ls node::0.0 &
There is a bug with vms DECwindows that means you have to add your user number
(or whatever its called on unix) to the destination nodes security for some
operations; so add this and user name.
Mark
|
| 362.5 | | SOOTY::CHAMBERS | I'll go mad and have the Beef | Thu Jul 05 1990 14:49 | 5 |
| ps cat /etc/passwd to find your user number.
(Spencer is 273)
Mark
|
| 362.6 | | CHEST::HAYCOX | Ian | Thu Jul 05 1990 15:16 | 13 |
| Actually it's
% dxterm -ls -d node::0.0 &
The -ls means Login Shell and the -d is short for display.
You could also do a
% setenv DISPLAY node::0.0 (equiv to set display/create/node=)
and forget the -d.
Ian.
|
| 362.7 | | CURRNT::RUSSELL | Middle-aged Mutant Hero Turtle (UK option) | Thu Jul 05 1990 15:52 | 6 |
| Thinks:
really must read an ULTRIX manual one of these days.
Peter.
|
| 362.8 | Manuals, got 20Mb of those. | BACK::haycox | Ian | Thu Jul 05 1990 16:34 | 5 |
| See 358.0 :-)
They are all on-line.
Ian.
|
| 362.9 | | SOOTY::ALFORD | An elephant is a mouse with an operating system | Fri Jul 06 1990 09:34 | 2 |
|
Where ?
|
| 362.10 | | SOOTY::CHAMBERS | I'll go mad and have the Beef | Fri Jul 06 1990 11:45 | 13 |
| %/usr/bin/X11/xman
(case sensitive) will give xwindows manual
%man <section>
gives manual pages
%apropos <section>
searches for entries
Mark
|
| 362.11 | nope - thats not fixed it.. | CUCKOO::SPENCER | | Mon Jul 09 1990 17:11 | 13 |
|
I enter the commandf and the following appears
back> dxterm -ls -d galvin::0.0 &
[2] 15217
back> Can't open display
[2] Done dxterm -ls galvin::0.0
any ideas
Nigel
|
| 362.12 | | CHEST::HAYCOX | Ian | Mon Jul 09 1990 17:27 | 4 |
| Remember you need to add BACK::spencer and BACK::273 into the security
option on the customise pulldown off the sesseion manager on GALVIN.
Ian.
|