| Title: | system management communications forum |
| Moderator: | CHEST::THOMPSON |
| Created: | Fri Mar 21 1986 |
| Last Modified: | Thu Jul 08 1993 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 490 |
| Total number of notes: | 2018 |
As has been stated previously (in the System Management notes
conference note #135), it will be necessary to change the node numbers
of all our systems when moving to Basingstoke.
In order to minimise potential problems at the Basingstoke end of
the operation, it has been decided to carry out the necessary changes this
weekend here at Acre Road. HEAD:: (which has already gone to the Crescent)
will be dealt with as an exception.
The impact of this is twofold:
1. All ADG machines at Acre Road will be unavailable from 17:30 on
Friday 29th April to midnight on Sunday 1st May.
2. You should notify all people who make direct links into ADG systems
(e.g. VAXmail users, Notes users of conferences of which you are a
moderator on ADG systems) of these changes) as soon as possible in
order to minimise confusion.
Those people who are responsible for microVAXes or GPX systems
should preferably be responsible for changing their own node numbers and
revising the entries on their DECnet databases within the timescale
outlined above. Assistance is available for anyone who does not feel
compentant to do this.
OLD NUMBER Node name New Number RESPONSIBLE PERSON
41.108 RDGE28 44.254 JERRY THOMPSON
41.131 SEPTIC 44.253 JERRY THOMPSON
41.135 MAIDEN 44.252 JERRY THOMPSON
41.137 ADGV01 44.251 JERRY THOMPSON
41.145 RDGE00 44.250 JERRY THOMPSON
41.173 VULCAN 44.249 JERRY THOMPSON
41.182 RDGE39 44.248 JERRY THOMPSON
41.196 RDGE43 44.247 JERRY THOMPSON
41.243 RDGE03 44.246 JERRY THOMPSON
41.308 HEWIE 44.300 IAIN HAYWARD
41.352 HAND 44.301 JERRY THOMPSON
41.432 CUCKOO 44.302 JERRY THOMPSON
41.480 PODULE 44.303 MURRAY SMITH
41.491 SOOTY 44.304 JERRY THOMPSON
41.492 SWEEP 44.305 JOHN EVANS
41.356 FINGER 44.306 ALAN NICHOLSBY
41.498 PERKY 44.307 --NOT USED--
41.690 ARMPIT 44.308 --NOT USED--
41.691 MOUTH 44.309 --NOT USED--
41.692 ANKLE 44.310 PETER BELLINGER
41.693 EAR 44.311 ALAN NICHOLSBY
41.694 BELLY 44.312 MARTIN GURRAN
41.695 BACK 44.313 IAN HAYCOX
41.696 BOTTOM 44.314 GARETH SIMS
41.697 SPINE 44.315 FRANCES HARTNETT
41.698 THROAT 44.316 STEWART CLARK
41.699 HAIR 44.317 JERRY THOMPSON
41.700 CALF 44.318 IAIN HAYWARD
41.703 ELBOW 44.319 STEVE DRAPER
41.704 TOE 44.320 JERRY THOMPSON
41.705 HEAD 44.321 JERRY THOMPSON
41.706 GROYNE 44.322 IAN HAYES
41.707 CHEST 44.323 JERRY THOMPSON
41.708 NECK 44.324 JERRY THOMPSON
41.709 LEG 44.325 JANICE JONES
41.783 EYE 44.326 JERRY THOMPSON
41.786 FOOT 44.327 JERRY THOMPSON
41.791 STOPIT 44.328 JERRY THOMPSON
41.713 CASOAS 44.713 PETER RUSSELL
Regards
Steve
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 136.1 | Temporary change to LPS40 name | 45380::THOMPSON | Thu Apr 28 1988 17:16 | 24 | |
We're going to have a brand new squeaky
clean LPS40 in the Crescent as opposed to the steam powered version
we've got at Acre Road.
The bad news is that the new one will have the same node name (EYE)
but different ethernet hardware address and DECNET node number.
On the 29th April, the LPS40 in ACRE Road will become DECNET node
TOE with a DECNET address of 44.320
New printer queues will be set up with names LPS40$TOE, PS_TOE,
ANSI_TOE, REGIS_TOE and TEK4014_TOE. Use these queues to get output
produced in Acre Road as from Tuesday 3rd May.
There will also be queues called LPS40$EYE, PS_EYE, ANSI_EYE, REGIS_EYE
and TEK4014_EYE. These queues will send output to the new printer
in the Crescent when the VAXes are relocated.
If you have LPS software installed on your microvax/GPX you must
reinstall the LPS40C020 kit after you've changed your DECNET node
area and number. The kit will be available on NECK::
| |||||
| 136.2 | The Ladybird book of DECNET areas | NECK::THOMPSON | Fri Apr 29 1988 14:48 | 44 | |
Here are hastily compiled instructions for changing DECNET areas. They seem to
work on the 2 nodes that I've tried. Please phone me if you find errors.
Jerry 6746
----------------------------------------
1 Stop the printer queues that use DQS or an LPS40 on your node
2 Copy NEW_NODE_NUMBERS.COM from NECK::
(41.708, or 44.324 after 30th April)
3 If you need to reinstall LPS40 software copy LPS40C020.A from NECK::
4 Execute NEW_NODE_NUMBERS.COM to redefine all ADG node names
(takes about 20 minutes on a Microvax II)
5 Change your network PERMANENT Database
$ MC NCP
NCP> DEFINE EXEC MAXIMUM ADDRESS 1023 !this is optional
NCP> DEFINE EXEC NUMBER 44.xxx !(your new area 44 number)
NCP> EXIT
6 This step is usually not needed on GPX's or �Vaxes
$ MC SYSGEN
SYSGEN> show /scs
If you have SCSSYSTEMID set to a non-zero value then reset it
to the new area value (1024*44 + node number)
SYSGEN> SET SCSSYSTEMID xxxxxx
SYSGEN> WRITE CURRENT
SYSGEN> EXIT
If you've changed SCSSYTEMID in SYSGEN then edit the new value into
sys$system:modparams.dat so it doesn't get wiped out with an old
value next time you autogen
7 Shutdown & reboot your node to restart DECnet with the new EXEC values
and ADG definitions.
8 Reinstall LPS40 software kit (if needed)
9 If you use NETUPDATEV2 ,then reschedule any NETUPDATE jobs to run after
Tuesday 3rd May to avoid downloading a bad database.
| |||||