[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference ufhis::siemens_communication

Title:Siemens Connectivity
Notice:FTSIE Contact is Michael Eisenhut @MUC 865-1487
Moderator:UFHIS::MEISENHU
Created:Tue Aug 30 1988
Last Modified:Mon Feb 19 1996
Last Successful Update:Fri Jun 06 1997
Number of topics:195
Total number of notes:512

104.0. "Strange message" by BERN01::DURAND (H. Durand, EIS Bern) Tue Apr 23 1991 21:55

In a testenvironment (for the governemnt) we are using X.25 as network
(ISO8208 profile). X.25 is up and running (state: on-synchronyzed).
Using FTSIE (V 1.4) I received the following meesage:

Command:

$ FTSIE COPY SYS$COMMON:[SYSMGR]WELCOME.TXT HOST1R1"SOFTLY ADMINSTR"REMOTE.TXT-
  /TRANSFER_MODE=SYNC/FORMAT=TEXT

Received message:

%FTSIE-I-NCSBE, SEND-REQUEST BELAN$DUA0:[SYS0.SYSCOMMON.][SYSMGR]WELCOME.TXT;
 (0084) STARTED
%FTSIE-E-EFTERR, request BELAN$DUA0:[SYS0.SYSCOMMON.][SYSMGR]WELCOME.TXT;
 (0084) transport system error 135
%SYSTEM-E-BADPARAM, bad parameter value
%FTSIE-E-FCCNO, command failed

In the access control string for the BS2000 host is no password (not 
necessary) set.

Controlling VOTS I got the folling information:

OSIT$CONTROL> SHOW KNOWN TSAP

TSAP name = 5BC6D1C1D4404040  (hex)
	Username       = FTSIE
	Password       = BULLSHIT1 ! sorry
	File           = SYS$COMMON:[SYSEXE]FTSIE$ISP_START.COM
.
.
.

OSIT$CONTROL> SHOW KNOWN NAP
Type		= X.25
Network		= DECSNI ! profile ISO8208
Subaddress      = 2
Call_mask       = not set
Call_value      = not set
Checksums       = Off
Classes         = 0,2,4
.
several timer values
.
Local_DTE       = 22222222

The address information for FTSIE:

symbolic name    HOST1R1
hostname         11111111
TSAP id          $FJAM
protocol class   2


Here in our location we have no experience with FTSIE. 

Thanks Hans-Peter
T.RTitleUserPersonal
Name		DateLines
104.1MUNTRA::SCHIMMELThe Answer Is 42Wed Apr 24 1991 09:1617
Hello,

 in your command you have omitted the :: after the access string. But I'm 
 afraid, thats not causing the problem...

 transport system error 131 indicates a problem with the code conversion
 tables, i.e. they're corrupted or not found. Pls check that the logical
  FTSIE$DIR is set as

      "FTSIE$DIR" = "SYS$SPECIFIC:[FTSIE]" (LNM$SYSTEM_TABLE)
        = "SYS$COMMON:[FTSIE]"

If this doesnt solve your problem, pls post the relevant NAP and SNAP 
entries and the FTSIE SH PARA and PARTNER output!

regards
  Helmut
104.2NOT ::BERN01::DURANDH. Durand, EIS BernWed Apr 24 1991 12:1271
Sorry, it was a bit late, i forgot the "::". The logical FTSIE$DIR is well
defined. I found  an error in the FTSIE entry. I used for the hostname only
the DTE address (11111111) instead of NAP%DTE_Address. 

$ FTSIE SHOW PARTNER

symbolic name    HOST1R1
hostname         11111111 ! DTE-Address of the BS2000 Host
TSAP id          $FJAM
protocol class   2


In my case I suppose it should be:

                       X25_DECSNI%11111111


There is no SNAP, because we use only X.25 (no internet).


OSIT$CONTROL> SHOW KNOWN NAP
Type		= X.25
Network		= DECSNI ! profile ISO8208
Subaddress      = 2
Call_mask       = not set
Call_value      = not set
Checksums       = Off
Classes         = 0,2,4
.
several timer values
.
Local_DTE       = 22222222


$ FTSIE SHOW PARTNER

symbolic name    HOST1R1
hostname         11111111
TSAP id          $FJAM
protocol class   2


CONFIGURATION:

        
BS2000 Host 
----------- 
| HOST1R1 | 
|         | 
----------- 
     |      
     |      
PDN  |  
  --------
  |      | DCE DTEADR=11111111
  --------
     |
   +---+  Modem  
   +---+
     |
     |
   +---+  Modem  
   +---+
     | DEC/VAX host                     VOTS - NAP Names 
----------                              X25_DECSNI with Subaddress 2
|        | DTEADR=22222222              
|        | DTE                          
----------