[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference 7.286::digital

Title:	The Digital way of working

Moderator:	QUARK::LIONELON

Created:	Fri Feb 14 1986
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	5321
Total number of notes:	139771

1570.0. "LIVEWIRE" by BOOVX2::FARHADI () Thu Aug 22 1991 11:37

    Is there a way of getting to Maynard or Marlboro's LIVEWIRE from
    other sites (I'm in Boston). I use to get a lot of good information
    from that. Thnx in advance

T.R	Title	User	Personal Name	Date	Lines
1570.1		VCSESU::BOWKER	Joe Bowker, KB1GP	`Thu Aug 22 1991 12:43`	7
	To get the MRO1 VTX server type the following: $ define/user vtx$server "runawy::""43="" $ vtx Joe
1570.3	DEFINE/USER is what you want...	SCAACT::AINSLEY	Less than 150 kts. is TOO slow	`Thu Aug 22 1991 15:45`	16
	re: .2 David, >Dont forget to type "DEASSIGN VTX$SERVER" afterwards or you won't be able to >get to your local VTX until after you log out and log back in again. Also, the >/USER is only necessary if you have a privileged account. Just leave it off if >you don't. DEFINE/USER defines the logical in USER mode. ALL user mode logicals get deassigned at image run-down. Thus, the local VTX$SERVER definition will automatically go away after the user exits VTX. The default mode for a logical is EXECUTIVE mode, which servives image rundown. That's why you MUST use DEFINE/USER unless you want to do a DEASSIGN VTX$SERVER after running VTX. Bob
1570.4	to PKO site server...	NHASAD::MORRISEY		`Thu Aug 22 1991 15:54`	8
	To get to the PKO site server directly: $DEFINE VTX$SERVER TELALL::"""150=""" $VTX when done $DEASSIGN VTX$SERVER or 'log off'.
1570.5	Whoops!	BSS::D_BANKS	David Banks -- N�ION	`Thu Aug 22 1991 16:50`	9
	Re: <<< Note 1570.3 by SCAACT::AINSLEY "Less than 150 kts. is TOO slow" >>> > -< DEFINE/USER is what you want... >- Well, I can now streamline a number of things I do by doing it the right way. Thanks for pointing out my error. I'll remove my earlier reply since it contains bad advice :-( - David
1570.6	/SUPER is default	WIDGET::KLEIN		`Thu Aug 22 1991 18:06`	6
	Nit, but accuracy counts: Actually, DEFINE/SUPERVISOR_MODE is the default. Not /EXECUTIVE_MODE as was noted in an earlier reply. -steve-
1570.7	Oooops...	SCAACT::AINSLEY	Less than 150 kts. is TOO slow	`Thu Aug 22 1991 21:17`	5
	re: .6 Yep, you are right. Bob