| TOOL NAME: DECSIM
TECHNOLOGY: Electrical
FUNCTION: Logic Simulator, Fault Simulator
GENERAL DESCRIPTION: DECSIM is a 4-state, multi-mode, interactive,
hierarchical logic simulator used to design and
simulate chips, boards, and systems. It can be
used at many levels: architectural, functional,
logic, or transistor. It consists of a simulator
and two modeling languages: structural and
behavioral.
STATUS: in operation
AVAILABILITY: HL02, DECSIM::DECSIM_SUPPORT
INTERFACES: Schematic entry tools, such as VALID, SUDS, CAE,
and Quickdraw.
Waveform display tools, such as HAMMER, TIMEEDIT,
SLANT, and DISPLAY.
Timing Verifiers such as AUTODLY and TV.
Behavior-to-Gate-level converters, such as APES and
SID.
Hardware simulators such as ZYCAD, VALID Realchip
and Realmodel.
AXE (VAX Architectural Exerciser).
The MICRO2 assembler.
Conversion tools, such as S2DSIM and SPIDER.
ITPG (Interactive Test Pattern Generator)
CPU/OPERATING SYSTEM: VAX/VMS
WORKSTATION: no special requirements
SOURCE LANGUAGE: BLISS
RESPONSIBLE ORGANIZATION: SEG/CAD; Tim Aldridge (DECSIM::ALDRIDGE),
customer support
TRAINING: internal courses; Colleen Toto (DECSIM::TOTO),
Simulation Group secretary
DOCUMENTATION: Hardcopy VAX DECSIM Reference Manual
VAX DECSIM User's Guide
VAX DECSIM Quick Reference Guide
DECSIM/ZYCAD Evaluation Book
Online DECSIM.DOC - release notes
ANINDEX.TXT - application notes
DECSIM::DECSIM - VAX Notes Conference
DECSIMOS.DOC - MOS release notes
GATES.NET - gate-level library
DCSMOSLIB.NET - MOS-level library
Documentation is available internally by sending
mail to CADSYS::DOCUMENT.
Documentation is not available externally.
|