| Title: | DECmcc user notes file. Does not replace IPMT. |
| Notice: | Use IPMT for problems. Newsletter location in note 6187 |
| Moderator: | TAEC::BEROUD |
| Created: | Mon Aug 21 1989 |
| Last Modified: | Wed Jun 04 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 6497 |
| Total number of notes: | 27359 |
This note cross posted in TeMIP conference...
<<< TAEC::DISK$HOGGAR_SYS:[NOTES$LIBRARY]TEMIP.NOTE;1 >>>
-< Telecom. Management Information Platform conference >-
================================================================================
Note 314.0 Start IP Poller at boot time No replies
DV780::SMITHG 29 lines 13-APR-1995 23:54
--------------------------------------------------------------------------------
I'm having some difficulty starting the IP poller automatically at boot
time. Previous notes in the MCC conference address this but for VMS
machines and MCC - we're using TeMIP V2.0A and OSF 3.0.
The method that I've used is to build an IP poller startup script into
/sbin/init.d that should be executed at boot time. The proper entry (a
link from /sbin/rc3.d) is in place as well. It appears that the poller
attempts to start, but then disappears.
The startup file being used is:
#!/bin/csh
#
/usr/mcc/mcc_system/mcc_ip_poller_enable.csh << !
<CR>
300
5
5
.nic.SNMP_alarms
<CR>
# end
The mcc_ip_poller_enable.csh script has not been changed.
Any help on this would be appreciated.
Thanks, Gary
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 6274.1 | Fixed it | DV780::SMITHG | Wed Apr 19 1995 19:12 | 21 | |
<<< TAEC::DISK$HOGGAR_SYS:[NOTES$LIBRARY]TEMIP.NOTE;1 >>>
-< Telecom. Management Information Platform conference >-
================================================================================
Note 314.1 Start IP Poller at boot time 1 of 1
DV780::SMITHG 13 lines 19-APR-1995 19:09
-< Fixed it >-
--------------------------------------------------------------------------------
We were able to fix the script so that the IP poller starts at boot
time. There were two issues:
1) the mcc_login.csh and temip_login.csh were not being properly
sourced and,
2) we needed to execute the startup script from /sbin/init.d using
the /usr/bin/nohup command as in:
/usr/bin/nohup /usr/mcc/mcc_system/ip_poller_enable.csh
There was evidently some signal that was being received that was
causing the ip poller process to quit right after being started???
| |||||