[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference azur::mcc

Title:DECmcc user notes file. Does not replace IPMT.
Notice:Use IPMT for problems. Newsletter location in note 6187
Moderator:TAEC::BEROUD
Created:Mon Aug 21 1989
Last Modified:Wed Jun 04 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:6497
Total number of notes:27359

5951.0. "DECNIS delay of stats reported to MCC" by GIDDAY::MORETTI (Not drowning...waving) Tue Apr 19 1994 02:07

    
    Have a problem with 2 DECNIS600 running sw 2.3 in an MCC V1.3
    environment on a 4000-90 running VMS 5.5-2 whereby they take 10 hours
    to start sending statistical information to the MCC node.
    
    The following script is used to setup the alarms for the DECNIS':
    
    delete mcc 0 alarms rule HBT_W622_4_0_OUT_STATS , in domain
    HBT_LTON_LINK
    !
    create domain HBT_LTON_LINK rule HBT_W622_4_0_OUT_STATS -
     expression= (Node Hbtnis HDLC Link W622-4-0 Outbound Utilization > 35
    -
            ,for start =  -0:00 duration = 00:02:00, AT EVERY 00:05:00) ,-
     Category = "Link to Lton High Utilization" ,-
     Alarm fired procedure = hec_net:MCC_ALARMS_MAIL_ALARM.COM ,-
     Alarm exception procedure= hec_net:MCC_ALARMS_MAIL_EXCEPTION.com ,-
     batch queue= "Alarm$batch",-
     alarm fired parameter = "NODE_MAIL",-
     auto enable = yes ,-
     severity = major
    !
    
    but my main question is ahs anybody else seen this delay in sending the
    information back to the MCC node ?
    
    After it starts to send the information back it operates normally and
    this was happening on the previous release of DECNIS sw V2.218.
    
    The alarms have been set for line utilisation and a report shouldbe
    sent every 5 mins but at the moment we have a 10 delay which the
    customer says can be reproduced at will.
    
    John
    CSC Sydney 
    612-561-5109
T.RTitleUserPersonal
Name		DateLines