Conference azur::mcc

5673.0. "Ultrix statistics & time problem using FCL" by EEMELI::KINNARI () Wed Oct 20 1993 06:53

Hi,

I have a weird problem using command line interface. 

I want to collect SNMP statistics (Inbound Utilization, Outbound Utilization)
and store it to file. Start time is 0:00 and end time is 23:59. Interval
is 5 mins and duration is 1 min.

My command is

show snmp helcis interface 2 Inbound Utilization, Outbound Utilization, -
  at every 0:5:0 until 23:59, for start (-0:00) duration 0:1:0, to file cisco.stat


If the clock is 08:00 command works but if it is 01:00 it doesn't !
I can't find the problem.

Rgds,
	//pasi

******************************************************************************

# date 0800
Wed Oct 20 08:00:00 EET 1993
# mcc_fcl
DECmcc (V1.3.0)

MCC> show snmp helcis interface 2 Inbound Utilization, Outbound Utilization, -
  at every 0:5:0 until 23:59, for start (-0:00) duration 0:1:0, to file cisco.stat

And everything is OK ... But

MCC> exit
# date 0100
Wed Oct 20 01:00:00 EET 1993
# mcc_fcl
DECmcc (V1.3.0)

MCC> show snmp helcis interface 2 Inbound Utilization, Outbound Utilization, -
  at every 0:5:0 until 23:59, for start (-0:00) duration 0:1:0, to file cisco.stat
%MCC-I-NOPARCMD, for start (-0:00) duration 0:1:0, to file cisco.stat
                 ^
%MCC-I-SYNTAXERR, Syntax error -- unable to interpret remainder of line
%MCC-E-INV_PERIODEND, invalid time element period end