[Search for users]
[Overall Top Noters]
[List of all Conferences]
[Download this site]
| Title: | DECmcc user notes file. Does not replace IPMT. |
| Notice: | Use IPMT for problems. Newsletter location in note 6187 |
| Moderator: | TAEC::BEROUD |
|
| Created: | Mon Aug 21 1989 |
| Last Modified: | Wed Jun 04 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 6497 |
| Total number of notes: | 27359 |
4535.0. "LMF failed with BMS T1.3.1 installing?" by TPACT1::MOBBYLIN (Mobby Lin @TPO, networker) Thu Feb 11 1993 21:17
Hi,
I just installed the BMS T1.3.1 in VAX6320 system from ppinc node.
When installing, the system prompted three error messages as below.
MCC-E-LMF-Failed
MCC-E-LMF-Failed
MCC-E-LMF-Failed
It seems to look the pak is failed. But this system had been running
well on the MCC BMS V1.2 system. I checked the license carefully.
When I do the IVP, getting the following messasges
%MCC-E-NOTFOUND, unsupported combination of verb, entity, partition
%MCC-E-NOTFOUND, unsupported combination of verb, entity, partition
The following command failed.
"MANAGE/ENTERPRISE TEST MCC 0 HISTORIAN_FM, TO FILE =
MCCBMS$OUT.TXT"
DECmcc BMS T1.3.1 Installation Failed
%MCC-F-FAILED, fatal DECmcc error
*********************************************************
Fatal DECmcc BMS T1.3.1 event occurred during installation
*********************************************************
When I start the BMS, the BMS shows me the Historian didn't enroll.
Then I enroll from MCC> enroll historian and MCC> enroll alarm.
It appears me the license checked fail.
THe question is I need the polycenter PAK to install or use the BMS
pak?
Hope someone can help me this issue.
Mobby.
| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 4535.1 | V1.2 PAKs no good on 1.3 | TOOK::MINTZ | Erik Mintz | Fri Feb 12 1993 07:18 | 3 |
| {V,T}1.3 requires new PAKs; the V1.2 PAKs are no longer valid.
See the kit announcement for details.
|