| Title: | DECmcc user notes file. Does not replace IPMT. |
| Notice: | Use IPMT for problems. Newsletter location in note 6187 |
| Moderator: | TAEC::BEROUD |
| Created: | Mon Aug 21 1989 |
| Last Modified: | Wed Jun 04 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 6497 |
| Total number of notes: | 27359 |
When running a set of tests on wildcard alarm rules and using the
Notification application, The notification application stopped
receiving alarms and the following message appeared.
[1] + Running mcc
mojave> Connect Accept Failed in server RPC: File table overflow
Socket failure: File table overflow
Socket failure: File table overflow
Socket failure: File table overflow
Socket failure: File table overflow
%Thread 347 terminating with exception:
Exception: Invalid memory address (dce / thd)
Connect Accept Failed in server RPC: File table overflow
Connect Accept Failed in server RPC: File table overflow
Running 1.2.7 on Ultrix 4.2a.
I have not reproduced the problem.
Any ideas..
- Mike
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 3133.1 | max_nofile? | TOOK::MINTZ | Erik Mintz, dtn 226-5033 | Thu Jun 04 1992 21:11 | 9 |
The file /sys/conf/mips/param.c has a parameter max_nofile. The installation guide suggests changing this from 64 to 256. Has that been done? If so, and you are using alarms heavily, you may want to try a larger value (we seem to use something like 800 or 1024). Note that you have to rebuild the kernel to make this take effect. -- Erik | |||||
| 3133.2 | TOOK::SWIST | Jim Swist LKG2-2/T2 DTN 226-7102 | Fri Jun 05 1992 08:30 | 3 | |
Also you might post the output of a /etc/pstat -T command.
| |||||