Conference help::decnet-osi_for_vms

3965.0. "Phase IV NCP to Phase V NCL command summary migration" by TFOS02::HEISER (Maranatha!) Wed May 21 1997 13:46

    The following is a conversion of DECnet Phase IV NCP commands into 
    DECnet/OSI Phase V NCL commands.  Many of the commands do not have straight
    one-to-one conversions.  Sometimes a single NCP command is the equivalent 
    of several NCL commands, and other times a single NCL command is the 
    equivalent of several NCP commands.  There are also some commands that 
    have no conversion into NCL.  The intent of this is to be used as a tool 
    to help with the migration to DECnet/OSI and be a quick reference for 
    commands.
    
    Phase IV commands                   Phase V commands
    ---------------------------------   ---------------------------------------
    NCP> CONNECT NODE <node-name>       $ SET HOST /MOP <node-name>
    
    NCP> CONNECT VIA <circuit-name> -   $ SET HOST /MOP /CIRCUIT = -
         PHYSICAL ADDRESS <address>        <circuit-name> ADDRESS = <address>
    
    NCP> COPY KNOWN NODES <parameters>  No conversion available
    
    NCP> DISCONNECT LINK                NCL> SHOW NSP PORT * ALL
                                        NCL> DELETE SESSION CONTROL PORT -  
                                             SCL$PORT$xxxxxxxx
    
    NCP> LOAD NODE <node-name>          NCL> LOAD MOP CLIENT <node-name>
    
    NCP> LOAD VIA <parameters>          NCL> LOAD MOP CLIENT <node-name> -
                                             CIRCUIT <circuit-name>     
    
    NCP> LOOP CIRCUIT <circuit-name> -  NCL> LOOP MOP CIRCUIT <circuit-name> -
    PHYSICAL ADDRESS <address>          	ADDRESS <address>
                                        NCL> LOOP LOOPBACK APPLICATION NAME -
                                              <node-name>
    
    NCP> SET EXEC NODE <node-name>      NCL> SET NCL DEFAULT ENTITY NODE -
                                              <node-name>
    
    NCP> SET EXEC NODE <node-name>      NCL> SET NCL DEFAULT ENTITY NODE -
           USERNAME xxxx PASSWORD yyyy           node-namexxxx yyyy
    
    NCP> SET KNOWN CIRCUITS ALL        	NCL> @SYS$MANAGER:NET$ROUTING_STARTUP.NCL
    
    NCP> SET KNOWN LINES ALL          	NCL> @SYS$MANAGER:NET$CSMACD_STARTUP.NCL
    
    NCP> SET KNOWN NODES ALL            No conversion available
    
    NCP> SET KNOWN OBJECTS ALL    	NCL> @SYS$MANAGER:NET$APPLICATION_STARTUP.NCL
    
    NCP> SET KNOWN PROXIES ALL          No conversion available
    
    NCP> SET LINE <line-name>           NCL> DISABLE CSMA-CD STATION -
         STATE OFF                            <circuit-name>
    
    NCP> SET LINE <line-name>           NCL> ENABLE CSMA-CD STATION -
         STATE ON                             <circuit-name>
    
    NCP> SET MODULE CONFIGURATOR        NCL> SHOW MOP CIRCUIT <circuit-name> -
         <parameters>                         STATION * ALL ATTRIBUTE
    
    NCP> SHOW CIRCUIT <circuit-name>    NCL> SHOW ROUTING CIRCUIT -
         CHARACTERISTICS                      <circuit-name> ALL
    
            adjacencies                 NCL> SHOW ROUTING CIRCUIT -
                                              <circuit-name> ADJACENCY *
    
            counters                    NCL> SHOW ROUTING CIRCUIT -
                                              <circuit-name> ALL COUNT
    
            service                     NCL> SHOW MOP CIRCUIT <circuit-name> -
                                   	      ALL
    
    NCP> SHOW EXEC CHARACTERISTICS      
          address                     	NCL> SHOW ALL IDENTIFIERS
    
          on/off                      	NCL> SHOW SESSION CONTROL ALL STATUS
    
          DECnet account, proxy       	NCL> SHOW SESSION CONTROL ALL -
                                               CHARACTERISTICS
          Type                        	NCL> SHOW ROUTING ALL CHARACTERISTICS
    
          Version                     	NCL> SHOW IMPLEMENTATION
    
          max broadcast nonrouters    	NCL> SHOW ROUTING CIRCUIT -
                                              <circuit-name> ALL
    
          max hops/visits/cost        	NCL> SHOW ROUTING ALL    !routers only
    
    NCP> SHOW KNOWN CIRCUITS            NCL> SHOW ROUTING CIRCUIT * ALL
    
    NCP> SHOW KNOWN DTE                 NCL> SHOW X25 PROTOCOL DTE * ALL STATUS
    
    NCP> SHOW KNOWN DTE -               NCL> SHOW X25 PROTOCOL DTE *
         CHARACTERISTICS                       ALL ATTRIBUTES
    
    NCP> SHOW KNOWN LINE COUNT          NCL> SHOW CSMA-CD STATION * ALL COUNT
    
    NCP> SHOW KNOWN LINKS               NCL> SHOW SESSION CONTROL PORT * ALL
    
    NCP> SHOW KNOWN LOGGING             NCL> SHOW EVENT DISPATCHER OUTBOUND -
                                              STREAM * ALL
    
    NCP> SHOW KNOWN NODES               NCL> SHOW ROUTING CIRCUIT -
                                              <circuit-name> ADJACENCY *
    
    NCP> SHOW KNOWN OBJECTS             NCL> SHOW SESSION CONTROL APPLICATION -
                                                * NAME
    
    NCP> SHOW LINE <line-name> CHAR     NCL> SHOW CSMA-CD STATION 
                                               <station-name> ALL
    
    NCP> SHOW NODE <node-name>          $ RUN SYS$SYSTEM:DECNET_REGISTER.EXE
                                        DECNET_REGISTER> SHOW NODE <node-name>
    
            load file                   NCL> SHOW MOP CLIENT <node-name> ALL
    
    NCP> SHOW OBJECT <object-name>      NCL> SHOW SESSION CONTROL APPLICATION -
         CHARACTERISTICS                        <object-name> ALL
    
    NCP> TELL <node-name> [commands]    NCL> SET NCL DEFAULT ENTITY NODE 
                                                <node-name>
                                        NCL> [commands]
    
    NCP> TRIGGER NODE <node-name>       NCL> BOOT MOP CLIENT <node-name>
    
    NCP> ZERO <paremeters>              No conversion available

Did you know that DECNET_MIGRATE.EXE can do a lot of this for you as well, that
is translation of NCP commands into NCL?