[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference jamin::pathworks32

Title:Digital PATHWORKS 32
Moderator:SPELNK::curless
Created:Fri Nov 01 1996
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:337
Total number of notes:1612

295.0. "Powerterm 525 and 7-bit chr. (NRC)" by COPHK::copvm5.dmo.dec.com::cop02::jesper () Thu May 15 1997 08:20

	Hi,

	I cant make PTW 525 to use 7-bit characters (danish NRC).

	On VMS I do: $ set ter/dev=vt100/noeight

	In PTW525 I remove any references to 8-bit and enable
	all that has to do with 7-bit.

	What happens is that the danish characters � � � becomes
	f x e. 
	
	Also in terminal->setup->general->NRC if I select
	Norwegian/Danish and then save the terminal setup, it does
	not save the NRC setup, at next startup it show NONE.

	This works in PW32 VT320 terminal emulator.

	Line drawing/semigraphics are broken when expanding PTW525
	to it maximum so it uses the largest font. A straight line
	becomes all qqqqqqq's. 

	Is these problems known.....and is there any fixes available?


	Regards
	Jesper
T.RTitleUserPersonal
Name		DateLines