Conference iosg::all-in-1_v30

    Hi Stefan,
    
    Are the following images installed DNS$RTL.EXE and DNS$SHARE.EXE both
    are in SYS$LIBRARY ?  The DNS$SHARE.EXE has to be installed as a
    protected image and here is an example from my system:
    
    DISK$VAXVMSV055:<SYS0.SYSCOMMON.SYSLIB>.EXE
       DNS$RTL;2        Open     Shar          Lnkbl
            Entry access count         = 14
            Current / Maximum shared   = 6 / 8
            Global section count       = 2
    
    DISK$VAXVMSV055:<SYS0.SYSCOMMON.SYSLIB>.EXE
       DNS$SHARE;2      Open     Shar     Prot Lnkbl
            Entry access count         = 48
            Current / Maximum shared   = 7 / 13
            Global section count       = 5
    
    Regards,
    
    Sunil

    Hi Sunil,
    
    The DNS images are installed correctly. 
    We changed the UIC before the upgrade. When setting the new owner on
    the files in [ALLIN1...] we had some problems because of locking. One
    of these files was OA$SUBMIT.EXE. We corrected this problems and are
    installing now again.
    
    Some other ideas?
    
    Stefan

Stefan,

The link is failing when building the shareable image stubs.  It looks like one
of the images that we defer is not installed in memory, the installation should
check for all these but I suspect the checks might not be totally complete.

Can you relink the current ALL-IN-1 Version without this error?  If you can
reproduce the error by just relinking the current version you'll save some time
debugging the problem!

I suggest doing:

$set watch file/class=major

Then either just doing a relink (if the problem shows up when relinking the
current system) or starting the upgrade again.

This will show the files accessed and should track down which image is causing
the problem.

Cheers,
	Chris.

P.S.  What version are you upgrading from and to?

    Chris,
    
    Nice idea, but on this system it doesn't work during vmsinstal because
    of 
    
    %DCL-W-SYMOVF, no room for symbol definitions - delete some symbols
    
    Raising CLISYMTBL to 500 doesn't solve the problem so I assume it's
    an undocumented feature of SET WATCH.
    
    I'll reboot the system and do another try tomorrow.
    
    Stefan
                              

    Stefan
    
    Chris in .3 meant SET WATCH for a relink
    Use $ @VMSINSTAL <product> <location> OPTIONS KCL, which turns tracing,
    debugging on during instal. It helped me a lot despite the overhead of
    extra diskspace.
    
    Good luck
    
    Hong

Stefan,

You could put the $set watch just before the call to A1LINK in KIIMAGES.COM.
You will find KIIMAGES.COM in saveset A103*.A

Cheers,
	Chris.

    stefan,
    
    tried STARS? it suggests that your problem may be caused by SYS$SHARE
    being defined as a search listed logical.
    
    regards,
    
    Andrew.D.Wicks

    Thanks for all your replies!
    
    I replaced all the files in OA$BUILD and OA$LLV with clean versions
    from a V2.4 kit and it worked. This was possible because they will
    reinstall all products that did some changes in these directories.
    
    The system has also been rebooted before the successful installation,
    so I don't exactly know the cause of my problems. But it seems that the
    installation uses some objects from V2.4 to relink the V3.0 during
    installation time. Can someone confirm?
    
    Stefan 

    NO, I can categorically contradict that.
    
    The V3.0 installation and link doesn't use any of the old object
    libraries or files. Also, it takes great care not to use any files in
    the SITE areas.
    
    Graham