Conference iosg::all-in-1_v30

    Lars-Olof,
    
    Is this reproduceable on a system that does not have the yet unreleased
    v3.0A on it?
    
    Regards,
    
    Andrew.D.Wicks

    
    Andrew,
    
    Yes, three customer has reported this, and all of them are running
    ALL-IN-1 v3.0-1. This problem has been verified inhouse on 3.0A 
    systems.
    
    I'm not abel to test on English systems, so if you can't reproduce the
    problem this might be a I18N-problem. 
    
    Regards,
    LOM

    Lars,
    
    at the moment I don't have anything other than v3.0A systems to hand so
    I didn't try it on a v3.0 or v3.0-1 English version - sorry
    
    can someone else have a try?
    
    regards,
    
    Andrew.D.wicks

    Hi All (especially LLV-countries),
    
    As Andrew can't reproduce this on ALL-IN-1/ENGLISH, this might be an
    I18N-problem.
    
    Denmark, Norway, Germany, Finland ....... Are you there? Can you help
    me and verify.
    
    If you have two ALL-IN-1 sytstems, it will take you just a couple of
    minutes:
    
    1	Load and activate the DSO-pak on the systems
    
    2	On systen A, create a drawer, make it shared, *NET with read access
    
    3	On system B, add that drawer to your filecab, and select the new
        drawer as current.
    
    4	Try to read a new mail message
    
    
    If you don't have two systems to play around with, you are welcome to
    access a test drawer on a node called STKOFF (ALL-IN-1/SWEDISH v3.0A).
    
    System/partition: STKOFF
    Username:         MANAGER
    Drawer:           TEST
      
    
    Best Regards
    LOM
    

    Lars,
    no problem with ALL-IN-1/GERMAN.
    From the error message (CAB_NEED_MORE) I would guess that the
    symbol #UNREADFOLDER is empty. I have no idea why this should
    happen after having selected a remote drawer. Did you have a
    look at a TRACE?
    Cheers,
    	helmut

    re.4
    
    Hello LOM,
    
    
    >Denmark, Norway, Germany, Finland ....... Are you there? Can you
    >help me and verify.
    
    What's wrong with Holland ?
    
    Anyway, can't reproduce the problem on 3.0A Dutch...
    
    Regards,
    
    Jan
    
    
    

    
    Lom,
    
    If they are running V3.0-1, there was a problem with the FCS not always
    recognising the INBOX. ICF #9 I believe resolves this problem.
    
    If the problem is reproduceable on V3.0A (MUPA) machines, then check to
    see if SYSTEM_FOLDERS.DAT has been correctly converted. It's part of
    the manual post installation tasks for MUPA. To check system folders,
    run SYS$SYSTEM:OAFC$SYSFOLD_SEED, choose option 6, and type ENUS as a
    language. MAIN should be the first listed entry, followed by INBOX. If
    INBOX comes first, and you're running MUPA, you haven't done the
    conversion.
    
    
    
    Kevin.
    
    

    Hi,
    
    re .7
    Yes, the conversion has been done, and if you enter ENUS you will first
    find MAIN, and then INBOX.
    Simular if you look at SVSV, first you find HUVUDL�DA an next INKORG.
    
    The problem is always reproduceable, both on ALL-IN-1/SVENSKA v3.0-1
    and v3.0A (saveset a created 17-AUG-1993 11:00:32.00).
    
    re .6
    Sorry Jan, I will include the Dutch version next time ;). Nice to hear
    that your LLV is OK.
    
    re .5
    Helmut,
    How is your golf? 
    Yes, the symbol #UNREADFOLDER is empty.
    
    
    So, only Swedish ALL-IN-1 seems to have this problem.
    Our MAIN drawer i HUVUDL�DA, where � is a char >ASCII(127)
    SLOVENSKY,CESKY and GREEK has also eightbit char in their translation
    of MAIN. Is v3 out ready for this products?
    
    Any idea?
    
    Regards
    LOM

    lars,
    
    I saw announcements for the Czech and Slovak versions shipping a couple
    of months back but I don't have any contacts in those countries and
    since they will hopefully fail to qualify for the World Cup next
    Wednesday I probably won't get to meet anyone!!
    
    I think I18N is supported out of Israel now - maybe Chaim knows
    someone?
    
    Regards,
    
    Andrew.D.Wicks

    Hello LOM and Andrew,
    
    Slovak and Czech for V3 is out for more than half a year. Greek only
    exists in V2.4, so no MAIN drawer in Greek. But we also produced
    Russian, Polish and Turkish version. 
    You are right that they use characters like the Swedish �, but for
    their languages they use different scripts (Russian = Latin-Cyrillic, 
    Turkish = Latin-5, Polish, Czech and Slovak = Latin 2).
    
    And then they probably defined MAIN drawer names for their language,
    which contain only <127 chars. Maybe their is a problem which only
    appears with your HUVUDL�DA, but we should have found it earlier then.
    
    Finally: yes ISE/Israel takes over ALL-IN-1 from us with some
    assistance in translation from ISE/Valbonne.
    
    	Stefan 

    Thanks ALL,
    
    Time for a CLD. The cutomer has paid 70 k$ for the DSO, and has 
    5000 ALL-IN-1 users on 8 different systems. I suppose the customer soon 
    going to be upset!
    
    Regards
    Lars-Olof M�rtensson
    Digital/MCS Sweden