| THanxx for answering, but as the customer is back on 2.4 I cannot
do as you recommend. So the best thing is, that I provide as much
information I have.
Environment:
VAXcluster 4 nodes, on 2 nodes ALL-IN-1 started. (2.4 german),
one ALL-IN-1 disk, two user disks, and about 20 shared directories
on another disk. VMS 5.5-2
I worked together with the ALL-IN-1 responsible at the customer site,
since about 5 weeks , we did any Preinstallation requirements, we ought
to do and started in the evening the upgrade.Customer had yet shut down
ALL-IN-1.
The installation finished ok, but in the log file I found some errors.
1) As I was told, DECwindows was not installed so I went on without
full CDA support. In the A1$POSTINSTALL.COM sections when ALL-IN-1
is started, the logfile then said:
Installing the CDA images
%OA-E-NOINSTALL, Error installing the Formlibrary
-RMS-E-FNF, file not found.
I presumed, that was because of the missing CDA RT services of VMS.
Investigating today I was told, that they have DECwindows, and found
some images in SYS$LIBRARY:CDA$ACCESS.EXE and DDIF$VIEWSHR.EXE.!!!
Could that be the cause of the INTEGER_CONVERSION problems??
2) also in the A1$POST section:
%OA-I-LASTLINE,"converting 2.4 PROFIL records for Custom. Mgtm..."
%OA-I-LASTLINE,"ALL-IN-1 running -- Converting user profile data file"
%OA-I-AIMNOOPEN,File #pstfile cannot be opened.
I had a look at the PST_TO_PROF.SCP and PST_TO_PROF2.SCP and think
the fields haven't been updated in the profiles.
By the way, at any point of the log,the message of "xxxx.flc is
obsolete" came out.. (memres.flc, manager....)
3) The IVP passed but the logfile couldn't be found. On the system
existed no IVP account, only MANAGER and POSTMASTER. (?)
So as I presumed there was no serious problem, I continued doing the german
postinstallation tasks, replacing WPLGETDOCSEL.FRM, WPSDINST.FRM, WP.FRM/WP_WPS-
PLUS.FRM, FC1.FRM, WPL_LANGS.FRM,CXP$HOSTS.FRM, SMPR$INDEX.FRM, WPPARG.FRM,
WPPARG3.FRM,WPSRWHAT.FRM, NIENTR.FRM, OA$SCT$SDF.FRM,OALLV.OBJ, OAFC$SERVER_
STOP.SCP, FDDTR.FRM, FC$IAD$INDEX$MENU.FRM, OA$LIST$FILES$MENU.FRM, OA$LIST$
MENU$MORE.FRM, new FORMAT.DAT, new STDFORMAT.DAT, new TMSTG__OPTIONS1.MEM
and .RNO, and a new FC.A1$MSG copied to OA$BUILD_GERMAN.
I did precompile OAFORM, MEMRES, MANAGER, CM but am not sure having compiled
and installed the message file too... Maybe the next hint.
Then I shut down ALL-IN-1 again, installed K701 (3.0-1).
Did aftwerwards the relink ($set def oa$build_share , @a1_eco001030_relink)
> While the relink I got some error messages about duplicate entries in the
VAXCRTL library, (link-w-muldef...) I found an old 2.4 Sitelink.com and
commented anything out. > ok.
Now I wanted to enter ALL-IN-1 with /USER=MANAGER/OVER=SHUT, to do the
ECO postinstall. but could enter only on one node without problems, on the
other I got an error message that I cannot open formlibrary !as.
After another problem with the Systemmanager having started ALL-IN-1 on one
node without privs, I managed to enter ALL-IN-1 without any problems, BUT
couldn't create a document, read it, edit it, or print it >
Formatter message number 092FF7A1 and INTEGER_CONVERSION with another message
number 092F8059. I had a look in the trace and saw the document being created.
So it seems to me that the problem is not being able to handle messages
internally.
After all these explanations, I hope someone of you has a guess, where I forgot
something, what indeed becomes more and more obvious for me ...
Thanxx
Marianne
|