[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference iosg::all-in-1_v30

Title:	OLD ALL-IN-1 (tm) Support Conference
Notice:	Closed - See Note 4331.l to move to IOSG::ALL-IN-1
Moderator:	IOSG::PYE

Created:	Thu Jan 30 1992
Last Modified:	Tue Jan 23 1996
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4343
Total number of notes:	18308

1451.0. "Single Node to VAXcluster ALL-IN-1 System" by WR1FOR::DISMUKEMO (Morris Dismuke DTN:521-5422) Fri Sep 18 1992 00:17

    Is there a pointer to instructions (check list) of things one need to
    do when converting from a one node ALL-IN-1 2.4 system to a 3900/4000
    VAXcluster ALL-IN-1 2.4 system?  The installation guide does not address 
    this situation.

T.R Title User Personal
Name Date Lines

1451.1 NCBOOT::HARRIS oooppps Fri Sep 18 1992 15:26 11

T.R	Title	User	Personal Name	Date	Lines
1451.1		NCBOOT::HARRIS	oooppps	`Fri Sep 18 1992 15:26`	11
	this was recently done at my customer site. as far as ALL-IN-1 went, it wasn't that big a problem. just had to make sure the NETWORK.DAT got populated with the cluster alias as location. there were also some homegrown ALL-IN-1 monitor procedures that had to be changed to deal with the clsuter alias. also, i have been told (by an ex-digit) that if you have group conferencing, then things can be confusing if you turn cluster alias on after you install gpc. ann

    this was recently done at my customer site.  as far as ALL-IN-1 went,
    it wasn't that big a problem.  just had to make sure the NETWORK.DAT
    got populated with the cluster alias as location.  there were also some
    homegrown ALL-IN-1 monitor procedures that had to be changed to deal
    with the clsuter alias.
    
    also, i have been told (by an ex-digit) that if you have group
    conferencing, then things can be confusing if you turn cluster alias on
    after you install gpc.
    
    	ann