[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference iosg::all-in-1_v30

Title:*OLD* ALL-IN-1 (tm) Support Conference
Notice:Closed - See Note 4331.l to move to IOSG::ALL-IN-1
Moderator:IOSG::PYE
Created:Thu Jan 30 1992
Last Modified:Tue Jan 23 1996
Last Successful Update:Fri Jun 06 1997
Number of topics:4343
Total number of notes:18308

1186.0. "Insufficient dynamic memory during image linking" by HTSC19::STEVENLAU (Steven Lau HKCS) Wed Aug 05 1992 08:46

     A customer installs ALL-IN-1 Starter V2.4. During the linking image phase,
the error insufficient dynamic memory comes out. Which SYSGEN or process quota
should be increase?

Thanks,
  Steven Lau
T.RTitleUserPersonal
Name		DateLines
1186.1Things related to PGFLQUOIOSG::TALLETTArranging bits for a living...Wed Aug 05 1992 10:081
1186.2 Also check VMS docsMDCRAB::HOWARDOur business is computers not moneyFri Aug 07 1992 14:3611
    I would also look up the error message in the VMS doc set.  I've gotten
    similar error, and the parameters the VMS doc set mentioned worked. 
    One time, however, I kept raising LRPCOUNT to a ridiculous level.  It
    finally worked, but two days later I discovered a hardware problem
    which seemed to be the root of it.  If the error message is INSFMEM, IT
    might be that NPAGEDYN is too low.  Check PAGEDYN as well.  I believe
    that PAGEDYN is different from NPAGEDYN in that if you run out, it just
    stops everything.  

    HTH,
    Ben