| Title: | *OLD* ALL-IN-1 (tm) Support Conference |
| Notice: | Closed - See Note 4331.l to move to IOSG::ALL-IN-1 |
| Moderator: | IOSG::PYE |
| Created: | Thu Jan 30 1992 |
| Last Modified: | Tue Jan 23 1996 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4343 |
| Total number of notes: | 18308 |
If this one should'nt be here, please delete it Andy.
I don't know if something went wrong with my installation. (no errors
from the logfile). I was doing some test, MGT MFC MP. I pressed the
help key and keep pressing CR, right after (I think #58, from 39 to
58(?), they are all same option TRAINING, ** ACCESS VIOLATION **.
Same thing happens with MSY,DAP,MMA,MNQ. Also if you choose a certain
option (number corresponding to topic you want)it does not give you
any information at all.
Anybody with BL123A please confirm if it is my installation ?
TTFN
ricardo
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 361.1 | BFMT (Breaks for ....) | IOSG::PYE | Graham - ALL-IN-1 Sorcerer's Apprentice | Mon Mar 30 1992 18:34 | 13 |
No, it does it for me on BL123 too.
Looks like you should post an SPR, once the CSCs are open for business
again....
I imagine there must be some duff information in the help source around
that point, so someone clever than me could sort it out so you could
fix it. Then Tony can explain how to customise help from CM!
Pretty sad that we ACCVIO, whatever is wrong with the file - Good job
it's in a fairly small corner of the product.
Graham
| |||||
| 361.2 | QAR? | AIMTEC::WICKS_A | Vote Bill'n'Opus for a weirder USA | Mon Mar 30 1992 19:03 | 22 |
Ricardo,
It's ok by me. Since GAP closed down the FT conference on Friday we
don't have any alternatives.
Note that there's a neat variation on this HELP problem
in some areas of the subsystem known as CM. In that after a number of
carriage returns you end up hung and have to press CTRL-Y (or if you're
a customer who disables this you have to do STOP PROC/ID=...)
I'm sure there are HELP problems elsehwhere and i'm not trying to pick
on CM per se - just i've been in there a bit recently as Simon can
confer.
P.S even though we as a CSC aren't open for business for SPRs we are
still submitting QARs!
Regards,
Andrew.D.Wicks
| |||||
| 361.3 | component HELP CODE | IOSG::TYLDESLEY | Tue Mar 31 1992 09:23 | 5 | |
Hi,
This is a known problem, and has been reported as an IPR on 23-Mar.
DaveT
| |||||