Conference iosg::all-in-1_v30

    I have just tried to create an account (BL122D) using the "normal"
    Digital Europe lastname.firstname naming convention. It worked fine.
    
    Can you post an example of the log file where the problem happens?
    
    Tony

    Regina,
    
    Hi. I have created a mumble.foo type user on the ~very latest~
    baselevel here, and then went to MGT MUA E and edited the PRVAPP 
    field. It all seemed to work as expected, and the script
    CM_SM_SWITCH_PRVAPP changed the value in the PRVAPP field as 
    required (although the "you will be notified" message was a little
    quirky, since the change was immediate!) and it set #SM_APP_CHANGE to 2
    and the create$fail flag to 3.
    
    I suspect that you may be seeing a bug that Simon has fixed in the 
    latest baselevel; I think he had some to do around the editing of this
    field, but he can confirm this. If it is not fixed when you get a later 
    baselevel, then we will have to look at the conditions of the script
    dispatch (SUBMIT_SCRIPT ( SCRIPT = "OA$LIB:CM_SM_SWITCH_PRVAPP.SCP",    
    P1 =       etc..)
    
    Cheers
    DaveT

    I upgraded to  BL123A, created a brand new account BROWN.JAMES,
    tried to put A in OA$PRVAPP, and it still does not want to do it.
    
    The only trace I found was a A1SUB.LOG. Diskquota is enabled 
    and enough! But then, I get the same A1sub.log with another account
    that works. 
    
    Hereafter the A1SUB.log, the A1TRACE and the A1$SCRIPT output.
    
    Thanks for any hint. Regina 


BROWN
USER1:
       Owner         Username           UIC       Account  Privs Pri Directory

james brown          BROWN          [2000,12]     JC9 EIS  Normal  4 USER1:[BROWN]
%DCL-I-SUPERSEDE, previous value of SYS$COMMAND has been superseded
%SYSMAN-I-NODERR, error returned from node BEST1
-SYSTEM-F-NODISKQUOTA, no disk quota entry for this UIC
%SEARCH-I-NOMATCHES, no strings matched
%DCL-E-OPENOUT, error opening USER1:[BROWN.ALLIN1]NEWDB.TMP; as output
-RMS-E-DNF, directory not found
-SYSTEM-W-NOSUCHFILE, no such file
%DCL-W-UNDFIL, file has not been opened by DCL - check logical name
%DELETE-W-SEARCHFAIL, error searching for USER1:[BROWN.ALLIN1]NEWDB.TMP;0
-RMS-E-DNF, directory not found
-SYSTEM-W-NOSUCHFILE, no such file
%UAF-I-MDFYMSG, user record(s) updated
    
Queue Display:
==============
    
Server queue OA$SCRIPT_ENGLISH, on BEST1::, mounted form DEFAULT
    /BASE_PRIORITY=4 /DEFAULT=(FEED,FORM=DEFAULT) /NOENABLE_GENERIC 
    /LIBRARY=ENGLISH /OWNER=[SYSTEM] /PROCESSOR=OA$SCRIPT_SYMBIONT 
    /PROTECTION=(S:E,O:D,G:R,W:W) /RETAIN=ERROR /SCHEDULE=(NOSIZE)

  Jobname         Username     Entry  Blocks  Status
  -------         --------     -----  ------  ------

  CM_SM_SWITCH_PRVAPP
                  ALLIN1         980      21  Retained on error
    %NONAME-E-NOMSG, Message number 00000002
    Submitted 30-MAR-1992 09:19 /FORM=DEFAULT /PARAM=("BOWERS.HILARY","3") 
    /PRIORITY=100
    File: _BEST1$DUA1:[ALLIN1.LIB_SHARE]CM_SM_SWITCH_PRVAPP.SCP;2 
        /SETUP=("MANAGER",)

  CM_SM_SWITCH_PRVAPP
                  ALLIN1         988      21  Retained on error
    %NONAME-E-NOMSG, Message number 00000002
    Submitted 30-MAR-1992 09:46 /FORM=DEFAULT /PARAM=("BROWN.JAMES","0") 
    /PRIORITY=100
    File: _BEST1$DUA1:[ALLIN1.LIB_SHARE]CM_SM_SWITCH_PRVAPP.SCP;2 
        /SETUP=("MANAGER",)

  CM_SM_SWITCH_PRVAPP
                  ALLIN1         999      21  Retained on error
    %NONAME-E-NOMSG, Message number 00000002
    Submitted 30-MAR-1992 10:07 /FORM=DEFAULT /PARAM=("BROWN.JAMES","0") 
    /PRIORITY=100
    File: _BEST1$DUA1:[ALLIN1.LIB_SHARE]CM_SM_SWITCH_PRVAPP.SCP;2 
        /SETUP=("MANAGER",)


TRACE Output:
=============

Removed to save space in notesfile. Contact Note author or Graham (IOSG::) Pye
for full text.

    This looks like the same problem as 322.* 
    
    Try out the command procedure detailed in one of the replies
    and I believe it should work.
    
    julia

    I do not have a general problem with the script processor,
    no co-exsystems, the right image installed, no cluster,
    no customs. It just does not work for NAME.FIRST kind of
    accounts. Can s.o. confirm that this works on their system,
    please? I just tried on another (BL122D) system and *it
    does not work either*. /rhr
    
    

    re.7
    
    > This looks like the same problem as 322.* 
    
    Its not. When this problem occurs, the entry will be
    "starting" forever. 
    
    re.8
    
    > accounts. Can s.o. confirm that this works on their system,
    
    I can reproduce the "BROWN.JAMES" problem on my system (BL123A 
    with fix of note 322).
    
    BROWN.JAMES used in SM MDQ RQU (also runs the script processor)
    works fine.

    Found it. Username is used for temp file specs in
    OA$LIB:CM_SM_SWITCH_PRVAPP.SCP. VMS does not like the dot.

    OA$LIB:CM_SM_SWITCH_PRVAPP.SCP contains:

        GET #CM_A1_USER = OA$SMB_PARAMETER_1 \-
         GET #SM_FAILURE_LOG_NAME = #SM_WARNING_LOG_NAME = -
            #SM_SUCCESS_LOG_NAME  = 'OA$SWITCH_PRVAPP_' #CM_A1_USER '.LOG' \-
         GET #CM_ERROR_NAME = "OA$SWITCH_PRVAPP_ERR_" #CM_A1_USER ".LOG" \-
         GET #CM_SWITCH = 1


    Possible fix:

        GET #CM_A1_USER = OA$SMB_PARAMETER_1 \-
        parse_user #cm_a1_user \-
         GET #SM_FAILURE_LOG_NAME = #SM_WARNING_LOG_NAME = -
            #SM_SUCCESS_LOG_NAME  = 'OA$SWITCH_PRVAPP_' $parse_user_name '.LOG'-
         GET #CM_ERROR_NAME = "OA$SWITCH_PRVAPP_ERR_" $parse_user_name  ".LOG" -
         GET #CM_SWITCH = 1
                                                                         

    
    Re .10)
    
    The PARSE_USER will only supply 9 characters to $PARSE_USER_NAME, which
    might be too short. Another workaround is:
    
            GET #CM_A1_USER = OA$SMB_PARAMETER_1 \-
             MAKE_FILE_NAME #CM_TMP,#CM_A1_USER,".LOG" \-
             GET #CM_TMP = FILE$.NAME:18[#CM_TMP] \-
             GET #SM_FAILURE_LOG_NAME = #SM_WARNING_LOG_NAME = -
                #SM_SUCCESS_LOG_NAME  = 'OA$SWITCH_PRVAPP_' #CM_TMP '.LOG' \-
             GET #CM_ERROR_NAME = "OA$SWITCH_PRVAPP_ERR_" #CM_TMP ".LOG" \-
             GET #CM_SWITCH = 1
    
    The ':18' is there to prevent the filenames to be longer than 39 char.
    
    Ciao,
    
    	Simon

    
    This is now available in STARS.  Please bare with us, there is
    alot of information on V3.0 now available, but also alot of
    information that still requires review etc.  
    
    Faith Donohue
      

    Hello,
    
    Customer reported that after applying the fix for this problem as described
    in STARS (Simon's code), job still retains on error with the same
    error number.
    
    This was caused by the fact that there are two more lines of code
    which use the username to construct a file spec. These lines
    are ONLY executed when the script fails to send a mail message
    to the MANAGER.
    Copy of the boilerplates to OA$LOG fail.
    
    These are the lines I modified to fix the whole script.
    
        GET #CM_A1_USER = OA$SMB_PARAMETER_1 \-                           
        MAKE_FILE_NAME #CM_TMP,#CM_A1_USER,".LOG" \-                     
        GET #CM_PARSED_A1_USER = FILE$.NAME:18[#CM_TMP] \-
        GET #SM_FAILURE_LOG_NAME = #SM_WARNING_LOG_NAME = -              
            #SM_SUCCESS_LOG_NAME  = 'OA$SWITCH_PRVAPP_' #CM_PARSED_A1_USER  '.LOG' \- 
        GET #CM_ERROR_NAME = "OA$SWITCH_PRVAPP_ERR_" #CM_PARSED_A1_USER  ".LOG" \-   
            GET #CM_SWITCH = 1                                               

	      GET #CM_TMP = "OA$LOG:" FILE$.NAME[#TEMPLATE1] "_" -
	        #CM_PARSED_A1_USER FILE$.TYPE[#TEMPLATE1]
	      COPY/FILE #TEMPLATE1 #CM_TMP
	    .END_IF
	    .IF FILE$.STATUS[#TEMPLATE2] EQ 1
	     .THEN
	      GET #CM_TMP = "OA$LOG:" FILE$.NAME[#TEMPLATE2] "_" -
	        #CM_PARSED_A1_USER FILE$.TYPE[#TEMPLATE2]
	      COPY/FILE #TEMPLATE2 #CM_TMP
    
    Regards,
    
    Jan