Conference iosg::all-in-1_v30

78.0. "ALL-IN-1 Performance Reporter FT Kit Available" by MRKTNG::SLATER (Marc, 264-6309; Beyond this place there be dragons.) Sat Feb 22 1992 03:50

          <<< DATABS::$255$DUA25:[NOTES$LIBRARY]DECTRACE_V11.NOTE;1 >>>
                     -< DECtrace for VMS V1.1 conference >-
================================================================================
Note 146.0     ALL-IN-1 Performance reporter FT kit now available     No replies
DATABS::HEATH                                        73 lines  20-FEB-1992 15:52
--------------------------------------------------------------------------------
+-+-+-+-+-+-+-+
|d|i|g|i|t|a|l|   I N T E R O F F I C E   M E M O R A N D U M  
+-+-+-+-+-+-+-+


To:  Distribution             Date:  20 February 1992
                              From:  Robert J. Denn
                              Dept:  NSM Product Management
                              DTN :  264-1197
                              Mail:  NUO1-1/A11
                              Node:  DATABS::DENN


Subj:  ALL-IN-1 Performance Reports for VMS V1 External FT


The ALL-IN-1 Performance Report (A1R) Field test kit is now
available in DATABS::A1R$V10KIT.  The documentation can be found
in DATABS::A1R$V10DOC.  The Installation Guide and User's Guide
are rolled into the same document and is called A1REPORTS_UG.  It
is available in postscript, ln03, text and bookreader formats.

ALL-IN-1 Performance Reports displays performance data collected
on ALL-IN-1's behalf and stored in an Rdb database by DECtrace
for VMS.  The report engine in ALL-IN-1 Performance Reports is a
SmartStar application that reads the data from the Rdb database
and generates the reports.  For FT, you will need to use the PAK
found in AI1-PERF-RPTS.PAK found in DATABS::A1R$V10KIT. This
product is a joint venture between DECtrace and Smartstar Corporation.
There is a royalty fee of $200.00 that internal as well as external
customers are required to pay to Smartstar for use of the produce.  
This royalty has been waived for field test sites, but you must use 
the AI1-PERF-RPTS.PAK.  

** If you use VTX PAK to get a PAK, your cost center will be cross 
     charged $200.00. **

DECtrace for VMS must be running on all the nodes for which you
want to collect ALL-IN-1 performance data.  The DECtrace kit is
available on DATABS::DECTRACE$V11AKIT in two savesets, EPC011.A
and EPC011.B (both are required).  The license PAK is available
internally in $VTX PAK.

You will need only a minimal knowledge of DECtrace to run the
ALL-IN-1 Performance Reports.  The ALL-IN-1 Performance Reports
User's guide describes what you need to get started and provides
some examples.  There are also sample command procedures included
with the kit to schedule collections and format the raw DECtrace
data.  Should you need DECtrace documentation, is is available on 
DATABS::DECTRACE$V11DOC.

The principal vehicle for reporting problems of submitting
questions is the DECtrace QAR system.  To obtain an account,
please forward the following information to Chong Soo at
DATABS::SOO:

      o  Name

      o  Location M/S

      o  Email address

      o  DTN

Subject:  ALL-IN-1 Performance Reports for VMS V1 External FT   Page 2


ALL-IN-1 Performance Reports is an easy-to-use product, with
little startup time required.  As such, we have scheduled a very
short field test cycle.  If you have any questions someone from 
engineering will be available to answer any questions you may have 
or to gather any feedback.
    

    I can't find ALL-IN-1 PERFORMANCE REPORT and DECTRACE ft kits.
    Did you change the place?If so, let me know the place.
    
    - DaeHee

I just checked and the kits seem to be there.  The logicals might not be
available during business hours on the east coast of the U.S. to keep 
resource contention down.

Marc

The kits is not on the location you informed.
databs:: always points to only databs::ootools_util:[decnet_fal].

Would you inform the exact directory specification of the kits ?
(both a1s & DECtrace)

Thank you in advance.
yklee

$ DIR DATABS::A1R$V10KIT:

Directory DATABS::TOOLS$DISK:[A1R.V10.FIELD_TEST.V10_0.SOFTWARE_KITS]

A1R010.A;1          AI1-PERF-RPTS-USER.PAK;1                AI1-PERF-RPTS.PAK;2
AI1-PERF-RPTS.PAK;1 SMARTSTAR.PAK;1     

Total of 5 files.

    
    
    I can get the saveset but I get error no priv when copying the PAKs.
    
    Any pointers.
    
    Glenn

Try VTX PAK under the Royalty PAKS menu.