| T.R | Title | User | Personal Name
 | Date | Lines | 
|---|
| 2742.1 |  | STAR::MCLEMAN | Jeff McLeman, VMS development | Thu May 10 1990 07:24 | 34 | 
|  | If you tried to use the VR160/VR290/VR299 on the SPX, and it switches
were set wrong, you'd get whjat you saw.
The following is the switch settings on the SPX module for the proper monitor:
For the VR160,VR290 and VR299 and VR297 monitors:
	switches should be in the OFF postition.
For the VRT19 monitor:
	Switches should be in the ON postition.
	|-------------------|
	|                   |
	|  |-------------|  |
	|  |         |  ||  |
	|  |-------------|  |
    ON  |                   | OFF
	|  |-------------|  |
	|  |         |  ||  |
	|  |-------------|  |
	|                   |
	|-------------------|
 (note that switch pack would be on your left lower side, with the 
   non-component side facing you.)
hope this helps.
jeff
 | 
| 2742.2 |  | STAR::MCLEMAN | Jeff McLeman, VMS development | Thu May 10 1990 07:25 | 3 | 
|  | Also,
you can order EK-WS01X-OS-001 to get the owners manual for the SPX.
 | 
| 2742.3 | Thanks for the info | MAZE::FUSCI | DEC has it (on backorder) NOW! | Thu May 10 1990 17:52 | 8 | 
|  | re: .1, .2
Strangely enough, all three came from IEG with with the switches set to
(off,on). 
(My order for the manual is already placed.)
Ray
 | 
| 2742.4 |  | STAR::MCLEMAN | Jeff McLeman, VMS development | Thu May 10 1990 20:35 | 3 | 
|  |     well actually one of the switches is unused (the bottom one in my
    previous example), but it is easy to explain flipping both.
    
 |