| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 675.1 | | HANNAH::MESSENGER | Bob Messenger | Tue Apr 25 1989 23:16 | 7 |
| Re: .0
It should be available from the SDC. It's not part of the standard DECwindows
doc set.
-- Bob
|
| 675.2 | thanks, and is it on-line for internal use? | NEXUS::B_BRADACH | | Wed Apr 26 1989 12:39 | 9 |
| Thanks for the response, I forgot to say that I also posted this
in DECTERM notes file (357). Also, would anyone know if this is
available internally, on-line??
thanks for the quick response.
bernie
|
| 675.3 | SDC -- no information on this manual | NEXUS::B_BRADACH | | Wed Apr 26 1989 16:04 | 11 |
| Re: .1
Bob: I just checked with SDC and they were unable to find a reference
to this manual. If anyone out there has a copy with a part number,
I would appreciate it.
thanks
bernie
|
| 675.4 | | HANNAH::MESSENGER | Bob Messenger | Wed Apr 26 1989 20:10 | 9 |
| Re: .3
I've forwarded your note to our technical writer, and she'll track down the
order number.
The SDC had *better* be carrying this manual...
-- Bob
|
| 675.5 | thanks | NEXUS::B_BRADACH | | Thu Apr 27 1989 12:06 | 10 |
| RE: .4
Bob:
thanks, I appreciate the efforts. Let me know if you hear anything
about this. There are several people on the Language Team here
who would like a copy also.
bernie
|
| 675.6 | | NEXUS::B_BRADACH | | Thu Apr 27 1989 16:11 | 12 |
| I received the information from Ann:
The order numbers for the DECterm Programming Manuals are:
Text Programming -- EK-DTERM-PM-001
Graphics Programming -- EK-DTERM-GM-001
Information came from Ann Murphya (HANNAH::MURPHYA)
bernie
|
| 675.7 | Credit where credit's due dept. | HANNAH::MESSENGER | Bob Messenger | Thu Apr 27 1989 18:13 | 4 |
| Actually, that's Ann Murphy (Hannah::MurphyA).
-- Bob
|
| 675.8 | Plea for online versions !!!!!! | 51402::LONINK | Gerard Lonink @UTO (SWAS Utrecht,The Netherlands) | Thu May 11 1989 05:36 | 8 |
| I have tried to find a reference to the two documents listed, but
they seem to be unknown. Since i need them urgently for one of my
customers, I would like to see online versions of the documents.
Could anyone out ther help me out?
Thanks in advance
|
| 675.9 | 1-800-DIGITAL (not available from SDC) | 56733::MESSENGER | Bob Messenger | Thu May 11 1989 17:38 | 13 |
| Re: .8
There is no on-line version of the DECterm programming manuals. You can
order them by calling DECDIRECT at 1-800-DIGITAL.
Most DECterm features are also described in the VT320 and VT330/VT340
programmer reference manuals. Of the new features, ANSI locator support
isn't in the published manuals; it's described in the VMS V5.1-1 release
notes, which I've posted in the DECterm notes conference,
HANNAH::DECW$DISK:[PUBLIC]DECTERM.NOTE (press KP7 to select).
-- Bob
|
| 675.10 | A deepening mystery | 32905::SWEENEY | Patrick Sweeney | Thu May 11 1989 18:07 | 2 |
| DECDIRECT a minute ago said they were not valid part numbers.
|
| 675.11 | As of 9:30 this morning... | 43248::LESLIE | Andy ��� Leslie, CSSE/VMS Europe | Fri May 12 1989 05:05 | 7 |
| I can confirm that these manuals are NOT available and are in fact unknown in
Europe.
This must be rectified, of course.
Andy
|
| 675.12 | We'll get to the bottom of this asap | 56733::MESSENGER | Bob Messenger | Fri May 12 1989 10:21 | 5 |
| I forwarded .10 to the DECterm product manager, and she says the issue is
being worked.
-- Bob
|
| 675.13 | Bad here too | 35179::HORNER | A.G.Bear, Low tech teddy bear | Fri May 12 1989 12:50 | 7 |
| RE: .10 & .12
P&CS says that the order numbers are bad too. They tried searching for
similiar numbers for me and came up with nothing.
Dave
|