| Title: | AlphaServer 4100 |
| Moderator: | MOVMON::DAVIS S |
| Created: | Tue Apr 16 1996 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 648 |
| Total number of notes: | 3158 |
I'vew searched but can't find:
The recommended cable used to connect a KZPAA to a 2t-tz887-ne mouinted
in the system cabinet.
What do we recommend for a TZ887-NE mounted in an SW800?
Will 2 4100's, one drive shelf (split bus), the h4020-aa management
station and a 2t-tz887-ne ALL fit in one system cabinet?
can the h4020-aa stand the 240V in the system cabinet?
FJP
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 533.1 | POBOXB::BAK | Fri Mar 14 1997 09:22 | 11 | ||
If you mount a TZ887-NE into a SW800 you will most likely exceed the max allowed SCSI cable length limit. Therefore you will need to run differential most likely using a KZPSA-BB. There is not enough room to load all you want into a single cab. You may want to consider using the H9B10 expander cab. All components that we list in the SOC for use have auto-sense power supplies. So yes the H4020 is rated for 208VAC. Dennis | |||||
| 533.2 | some ideas | TROOA::MSCHNEIDER | [email protected] | Fri Mar 14 1997 18:33 | 5 |
You may wish to consider the TZ885 .... fits nicely into a rack. Also
the CSS folks have a taller rack than the corporate 4xxx rack. That
may help to get all this stuff into one rack. Alternatively a KZPSA
with DWZZA will allow you enough cable length if you need to go to
another rack for the TZ887 tape.
| |||||
| 533.3 | Cables needed | BRLLNT::MONTAQUILA | Wed Mar 19 1997 08:55 | 6 | |
To connect the tape drive to a KZPAA use a BN23G cable (50HD to 50LD)
The KZPSA to the SW800 would use:
KZPSA--> BN21K ----> DWZZA --> BC19J ------> TZ887
(68HD - 68HD) (50LD - 50LD)
FWD FNSE
| |||||