|  | Hi Rich,
I don't think there was a hardware switch, but there is an SRM enviroment 
variable that the driver would check. Here's a blurb from the 
AlphaStation 200 Service Guide:
tga_sync_green	This variable is used to control the composite video signal  
                for monitors on the ZLXp controller that cannot detect the 
                presence of composite video or v/h signals.  The possible 
                values are:
                1 - Composite video for first ZLXp.
                2 - Composite video for second ZLXp.
                3 - Composite video for first and second ZLXp.
Cheers,
Terry
 | 
|  | 
   The Synch-on-Green is an Environment variable, and only under SRM.
   There is a switch setting on the ZLXp-E1 module that can force-select
   synch-on-green, but NT cannot switch the console between the bootstrap
   console display *and* the run-time displays.  (ie: one gets garbage
   during the bootstrap, until NT is up and running.  These systems must
   be set to auto-boot, as the AlphaBIOS/ARC lacks support for a serial
   console and for the TGA_SYNC_GREEN environment variable.)
   See WRKSYS::ALPHASTATION 41.13, 41.21, and 41.23, etc.
 |