| Title: | Space Exploration |
| Notice: | Shuttle launch schedules, see Note 6 |
| Moderator: | PRAGMA::GRIFFIN |
| Created: | Mon Feb 17 1986 |
| Last Modified: | Thu Jun 05 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 974 |
| Total number of notes: | 18843 |
A quick question: What are the max G forces that occur during a shuttle launch? Is there a good document that talks to all the launch requirements for a payload...? Thanks, Erik
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 960.1 | 2.5 - 3.0 Gs from memory | SNOFS2::AYRE | Tue Jan 23 1996 20:14 | 9 | |
From memory, I belive that the shuttle is subjected to 2.5 - 3.0 G's
during launch, and about 2.? during re-entry.
I have the exact numbers at home in a book. I will have a look tonight
and post them tomorrow.
Andrew
| |||||
| 960.2 | skylab.zko.dec.com::FISHER | Minister of Acronyms, Holder of Past Knowledge, DNRC | Wed Jan 24 1996 12:36 | 5 | |
The Web has a wealth of info. Try starting at http://shuttle.nasa.gov I would not be surprised if it eventually led to info about the requirements for payloads. Burns | |||||
| 960.3 | Rocket environments pretty harsh place.... :) | NETCAD::BATTERSBY | Wed Jan 24 1996 16:44 | 13 | |
Yup besides the raw static g-force to determine physical support
of a payload, there are other requirements such as shock & vibration
characteristics that the payload would have to survive. the shock
& vibration have complex & multiple frequencies, which probably vary
in amplitude and frequency depending on which coordinate (X,Y,Z)
which also have to be considered for securing electronics etc. within
the payload. I recall an old project over 10 years ago that I worked on
where we were asked to meet certain MTBF (reliability) criteria. MTBF
can be calculated for different kinds of environments. One of them
was referred to as "rocket environment", the most harsh environment
one can probably have when it comes to punishment given to electronics.
Bob
| |||||