|  |     ST to SC cables have the DEC part number BN34A-xx.
    
    The full descriptions are below.  They show up on VTX PRICE.
    
    HOWEVER, please be advised that there was a problem with early versions
    of the push-pull ST connector. On some of our adapters, the PP ST2 did 
    NOT lock onto the tabs.  The PP ST worked well on the patch-panel ST
    connectors.  
    
    You might want to contact DECconnect Engineering (Barry Zink) for an
    update on this product.
    
    
    Dick Kirk
    Network Product Support
    
    
    Option_NO  PART_NUM                        PART_DESC
    ---------  --------- ----------------------------------------------------
    BN34A-01   170414701  CABLE ASSY,ST-SC PUSH-PULL MULTIMODE DUPLEX 1.0METR
    BN34A-03   170414703  CABLE ASSY,ST-SC PUSH-PULL MULTIMODE DUPLX  3.0METR
    BN34A-10   170414705  CABLE ASSY,ST-SC PUSH-PULL MULTIMODE DUPLX 10.0METR
    BN34A-20   170414706  CABLE ASSY,ST-SC PUSH-PULL MULTIMODE DUP 20.0METERS
    BN34A-2E   170414702  CABLE ASSY,ST-SC PUSH-PULL MULTIMODE DUPLX  2.5METR
    BN34A-30   170414707  CABLE ASSY,ST-SC PUSH-PULL MULTIMODE DUP 30.0METERS
    BN34A-4E   170414704  CABLE ASSY,ST-SC PUSH-PULL MULTIMODE DUPLX  4.5METR
    
 | 
|  |    I saw these cables in the DECconnect catalogue and discounted them as being 
   different ST2 types than the ones I'm used to. Can you please explain the 
   difference, if any, between these PP ST2s and the "older" ST2 bayonet (?) 
   types...
 
   Will I get away with using these with plain ol' ST2 bulkhead connectors in a 
   patch-frame ?
 
   Thanks
 
   Rog
 |