[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference 7.286::fddi

Title:	FDDI - The Next Generation

Moderator:	NETCAD::STEFANI

Created:	Thu Apr 27 1989
Last Modified:	Thu Jun 05 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	2259
Total number of notes:	8590

1740.0. "STP for DECconcentrator 900 ?" by ANNECY::FARABET (Bit Error Rate Tester) Mon Jul 10 1995 09:04

    I would like to replace an existing DECconcentrator 500 with a
    DECconcentrator 900 to save space in a custom configuration.
    
    The DECcontrator 500 was configured with a STP board (DEFCN-SA)
    and I don't find such a STP board for DECconcentrator 900 !
    
    Is there such a board (or solution) for DECconcentrator 900, as
    I have to keep all the cables the same ?
    
    
            Thanks,
    
            Bertrand.

T.R Title User Personal
Name Date Lines

1740.1 STP is dead... NETCAD::MELARAGNI Wed Jul 12 1995 07:46 9

T.R	Title	User	Personal Name	Date	Lines
1740.1	STP is dead...	NETCAD::MELARAGNI		`Wed Jul 12 1995 07:46`	9
	No, we do not produce an STP interface for the DEChub products. Highly unlikely that we ever will, either. STP has been replaced with the standards-based TP-PMD which uses 100 ohm unshielded twisted pair for its media. The connector is an 8 pin MJ. The TP-PMD interfaces we sell will also support a shielded version of the UTP cable, thus it may serve the same market as the STP config. bill

No, we do not produce an STP interface for the DEChub products. Highly
unlikely that we ever will, either. STP has been replaced with the
standards-based TP-PMD which uses 100 ohm unshielded twisted pair for
its media. The connector is an 8 pin MJ.

The TP-PMD interfaces we sell will also support a shielded version of
the UTP cable, thus it may serve the same market as the STP config.

bill