[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference 7.286::fddi

Title:	FDDI - The Next Generation

Moderator:	NETCAD::STEFANI

Created:	Thu Apr 27 1989
Last Modified:	Thu Jun 05 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	2259
Total number of notes:	8590

1721.0. "PCNFS <-> OSF1 over FDDI performance. What should I get? " by LARVAE::TREVENNOR_A (A child of init) Mon Jun 19 1995 13:01

    Xposted from the NFS conference.
    
                     <<< SMURF::USERA:[NOTES]NFS.NOTE;2 >>>
             -< SunNet - the defacto distributed system standard >-
================================================================================
Note 419.0  PCNFS <-> OSF1 over FDDI performance. What should I get?  No replies
LARVAE::TREVENNOR_A "A child of init"                16 lines  19-JUN-1995 12:41
--------------------------------------------------------------------------------
    
    Hi All,
    		I have a DEC 2100 sitting back to back with a PC over FDDI
    (single attached stations in the server and the PC). The PC is a 66mhz
    486. The Server is running DEC Unix V3. The PC is running PCNFS. 
    
    I have a file in the PC hard disk (an RZ26 which is capable of
    delivering 3.8 Mbytes/sec according to the Adaptec SCSI bench program).
    I want to transfer this file at maximum warp to an RZ28 on the DEC
    2100. I'd expect to be able to put about 800 Kbytes/second downline to
    the server in this scenario (is that realistic?) but in fact I can only
    put about 100Kbytes. In my view something's wrong. Anyone know what, or
    is it my expectations that are wrong!
    
    Regards
    Alan T.

T.R Title User Personal
Name Date Lines

1721.1 NETCAD::STEFANI Welcome to the Revolution! Mon Jun 19 1995 13:26 20

T.R	Title	User	Personal Name	Date	Lines
1721.1		NETCAD::STEFANI	Welcome to the Revolution!	`Mon Jun 19 1995 13:26`	20
	>>put about 100Kbytes. In my view something's wrong. Anyone know what, or >>is it my expectations that are wrong! If you're running PC-NFS, you're likely using the NDIS 2.01 drivers. These drivers (because of the DOS/Windows architecture) are quite limited in performance compared to the 32-bit drivers. The drivers translate from Ethernet/FDDI on both receive and transmit, they limit the packet size to max Ethernet (~1500 bytes), they use I/O mapping of the adapter registers instead of memory mapping, and they only allocate a few host buffers for transmit/receive because of size limitations. DOS and Windows don't lend themselves that well to Bus Master DMA devices, for other reasons I won't go into, and that's why the industry push towards 32-bit and beyond OS's is so important to vendors like us selling high performance controllers. I would recommend that you use Windows NT rather than DOS and see if you achieve the throughput you're looking for. /l

    >>put about 100Kbytes. In my view something's wrong. Anyone know what, or
    >>is it my expectations that are wrong!
    
    If you're running PC-NFS, you're likely using the NDIS 2.01 drivers. 
    These drivers (because of the DOS/Windows architecture) are quite
    limited in performance compared to the 32-bit drivers.  The drivers
    translate from Ethernet/FDDI on both receive and transmit, they limit
    the packet size to max Ethernet (~1500 bytes), they use I/O mapping of
    the adapter registers instead of memory mapping, and they only allocate
    a few host buffers for transmit/receive because of size limitations.
    
    DOS and Windows don't lend themselves that well to Bus Master DMA
    devices, for other reasons I won't go into, and that's why the industry
    push towards 32-bit and beyond OS's is so important to vendors like us
    selling high performance controllers.
    
    I would recommend that you use Windows NT rather than DOS and see if
    you achieve the throughput you're looking for.
    
    /l