| Title: | FDDI - The Next Generation |
| Moderator: | NETCAD::STEFANI |
| Created: | Thu Apr 27 1989 |
| Last Modified: | Thu Jun 05 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 2259 |
| Total number of notes: | 8590 |
?????
Customer has decelms V1.1 and has 2 new DB510's..his other
bridges are DB500's. I tried to setup the new bridges but
the elms software reports them as
Device type "unknown device" and when you do a sho char
its the same with software version 1.2 and no other info.
The only difference I can see is the AP module which is
an AP2 for the DB510. switch settings are as normal
3,4,10=manage both ports and AUI selected.
Any ideas.
rgds
steve
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 1068.1 | Not Supported via DECelms | BWTEAL::WOESTEMEYER | Why??...Why not!!! | Mon Aug 23 1993 07:46 | 8 |
I'll hazard a guess. DECelms supports the Lanbridge 100, 150, 200, and
the DECbridge 500. Notice the '00'. It does not support any other
DECbridge, this includes the 510. Since it does not support the
DECbridge 510, it will be an unknown device type. Support for the
DECbridge 5xx/6xx is only provided in The DECmcc ELM modules.
Steve Woestemeyer
CSC/CS - Network Support Team
| |||||
| 1068.2 | mcc or snmp needed | QUIVER::WALTER | Wed Aug 25 1993 12:23 | 5 | |
Steve is right. To manage the DECbridge 5xx/6xx series, you need either
DECmcc with the Bridge AM module, or an SNMP management station.
Dave
| |||||