| Title: | FDDI - The Next Generation |
| Moderator: | NETCAD::STEFANI |
| Created: | Thu Apr 27 1989 |
| Last Modified: | Thu Jun 05 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 2259 |
| Total number of notes: | 8590 |
Are we allowed to mix DEFCN-NA (4 port card) and DEFCN-HA (6 port
card) in the same DEcconcentrator 500. I have two DECconcentrators and
each have one DEFCN-NA. I plan to instal one DECCN-HF in each unit.
-HA says factory installed and -HF says field installed. What
really is the difference between factory installed and field installed?
Does the 'dash' number change just for putting the board in, at the
factory ?
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 1014.1 | OK to mix 4 & 6 port cards | ASDS::LEVY | Tue Jul 06 1993 10:28 | 12 | |
> Are we allowed to mix DEFCN-NA (4 port card) and DEFCN-HA (6 port
> card) in the same DEcconcentrator 500. I have two DECconcentrators and
> each have one DEFCN-NA. I plan to instal one DECCN-HF in each unit.
Yes. This is a perfectly valid configuration, provided firmware version
3.2 is installed.
> -HA says factory installed and -HF says field installed. What
> really is the difference between factory installed and field installed?
Place of installation is the only difference. Otherwise, they are
identical.
| |||||
| 1014.2 | Mixing DEFCN-LF with DEFCN-HF | GIDDAY::STANISLAUS | Wed Jul 07 1993 21:11 | 5 | |
From the Author of .1. Also DEFCN-LF (lower power 4 port module) can be mixed with DEFCN-HF (6 port module). | |||||