| Title: | FDDI - The Next Generation |
| Moderator: | NETCAD::STEFANI |
| Created: | Thu Apr 27 1989 |
| Last Modified: | Thu Jun 05 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 2259 |
| Total number of notes: | 8590 |
Hi folks! I have troubles with a DECbridge 620. The bridge resets itself and the "unsolicited reset" counter increases. This is a fatal problem for the customer, because the Cluster sattelites are crashing. (selftest + preforw. state takes approx. 1.20 min) We have changed all modules except backplane, but still the same. My question now, which errors (bridge- or network problems) can cause these "unsolicited resets"? thanks in advance for any help Alf
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 668.1 | Make sure you are running v1.2 firmware | QUIVER::CINNAMON | Fri Aug 14 1992 18:10 | 33 | |
Alf,
This sounds very serious. First check to make sure you are running V1.2
firmware. There were a number of things in prior releases that could cause the
bridge to crash which would be reflected in the 'unsolicited reset' counter.
Here is a list:
Version 1.2 Corrections
-----------------------
DECbridge 600 Series Only
-------------------------
Symptom: Bridge crashes periodically.
Problem: Firmware executes bug check if it sees the silo overflow
bit set in the LANCE receive ring descriptor.
Correction: Bridge does not crash but counts the error and remains
operational.
Symptom: Bridge crashes periodically.
Problem: Firmware executes bug check if the LANCE CSR has the
babble bit set.
Correction: Bridge does not crash but counts the error and remains
operational.
Symptom: Bridge crashes when accessed through the IP protocol (example
SNMP requests and pings).
Problem: ARP messages received causes a crash if the bridge
obtained IP address via BootP protocol.
Correction: Bug fixed. Bridge will not crash on receipt of ARP messages.
-Mike Cinnamon
| |||||
| 668.2 | Looking for v1.2 | VNABRW::PARGFRIEDER | Fri Aug 21 1992 07:29 | 10 | |
Hallo Mike!
Thank you for the answer.
Do you know where we can get the latest Software Version (vers. 1.2)??
Thanks for any help
Alf
| |||||
| 668.3 | available on VOID | BAGELS::LEVY | Fri Aug 21 1992 11:01 | 3 | |
DECbridge V1.2 microcode is available on VOID. If you do not have
access to VOID, contact your Country-group Support Center. In the DACH
group, Peter Hilger can help you.
| |||||