| Title: | FDDI - The Next Generation |
| Moderator: | NETCAD::STEFANI |
| Created: | Thu Apr 27 1989 |
| Last Modified: | Thu Jun 05 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 2259 |
| Total number of notes: | 8590 |
On a DECbridge 520, firmware rev. 2.9.0, software rev. 1.1.0
If after setting an IP address (ie: 130.98.3.134), you reset the
DECbridge from DECmcc :
mcc> reset bridge clbrgaa
The bridge reboots and is working fine as a bridge but you are now
unable to set a parameter on it or to reset it again through DECmcc.
Each time, you receive an "Invalid Password" error message.
Nobody set a Password on the DECbridge.
If you set a Password on the DECbridge 520 at the same time you
set the IP address (ie: password = system), the problem is still
the same after rebooting the DECbridge 520.
7 x DECbridge 520 have this problem.
12 x DECbridge 620 are running WITHOUT this problem
. Is this a known problem ?
. Is there any way to display the NVRAM location containing the
password ? (mail on sos6::grossetete if restricted diffusion)
. Is v.1.2 available to test it ?
Patrick
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 588.1 | Get Version 1.2 | QUIVER::POULIN | Thu Jun 04 1992 08:37 | 24 | |
Patrick,
There is no way to display the NVRAM location containing the password.
If the password is lost, the bridge must be reset with defaults.
We are in the process of attempting to reproduce this problem in our
lab (we are DECbridge development).
In the meantime, I suggest that you upgrade the firmware to Version
1.2, which is the latest as of this date (June 4, 1992), and try to
reproduce the problem.
I would also suggest reporting this problem through normal channels if
you still see it in Version 1.2.
We will post our results here as soon as possible.
John
| |||||
| 588.2 | Worst with v.1.2 | PRSSOS::GROSSETETE | Mon Jun 22 1992 10:58 | 12 | |
7 x DECbridge 520 have been upgraded with v.1.2
Problem is more critical with v.1.2 since after setting the
IP address, DECbridge 520 never reboots and continuoulsy
reset itself. This could seem normal if the NVRAM is corrupted
and NVRAM CRC is bad !
Problem will be escaladated through official channel (CLD).
Patrick
| |||||
| 588.3 | Problem fixed in new version 1.2.1 | QUIVER::KRISHNA | Thu Jul 30 1992 18:10 | 8 | |
The problem has been reproduced and it was due to a bug in the
operational firmware that was causing the bridge to reset. The bug has
been fixed and there is a new version of firmware V1.2.1 for the
DECbridge 5XX series. For more information on this new version of
firmware contact Mike Piechota in the Support Organization. He can be
reached at SASE::PIECHOTA
Krishna
| |||||