[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference 7.286::fddi

Title:	FDDI - The Next Generation

Moderator:	NETCAD::STEFANI

Created:	Thu Apr 27 1989
Last Modified:	Thu Jun 05 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	2259
Total number of notes:	8590

487.0. "How to test concentrator with DEMFA module" by SKIVT::INGRAM () Wed Feb 26 1992 15:20

    Hello,
    
    	I am looking for information on how to test the concentrator 500
    with a module and cables.  Basically, we have an order on a VAX 9000
    for a DEMFA option.  We wanted to hook the module to the concentrator
    and use loopbacks to test the set up.  Unfortunately, we are getting an 
    error because VMS does not have the concentrator address.  Do we need
    to build some sort of bridge and hook up another VAX 9000?  Help
    please!
    
    -Harvey

T.R Title User Personal
Name Date Lines

487.1 KONING::KONING Paul Koning, NI1D Wed Feb 26 1992 15:59 6

T.R	Title	User	Personal Name	Date	Lines
487.1		KONING::KONING	Paul Koning, NI1D	`Wed Feb 26 1992 15:59`	6
	Use NCP to find out the Upstream Neighbor address on the MFA, then use NCP LOOP CIRCUIT to that address. That should help. Alternatively, you can go to the concentrator, transcribe the address from the label on the A/B port board, and use that in the LOOP CIRCUIT command. paul

Use NCP to find out the Upstream Neighbor address on the MFA, then use
NCP LOOP CIRCUIT to that address.  That should help.  Alternatively, you
can go to the concentrator, transcribe the address from the label on the
A/B port board, and use that in the LOOP CIRCUIT command.

	paul