| Title: | FDDI - The Next Generation |
| Moderator: | NETCAD::STEFANI |
| Created: | Thu Apr 27 1989 |
| Last Modified: | Thu Jun 05 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 2259 |
| Total number of notes: | 8590 |
Attached is a FDDI configuration diagram which I'm trying to get a
verification on. The core of the question is "Do you have to have
a ring or dual ring in a FDDI configuration."
The config below is simply two concentrators connected in a cascaded
fashion using SMF. There is no dual ring. A competitor has said that
they don't think this is valid. Two questions:
a) Do you have to have a dual-ring
b) have I configured the concentrators below correctly
(ie; the B-port of concentrator #1 plugged into
an M-port of concentrator #2?)
Dave Korns,
Ethernet +-----------2-+
============== |DEFCN-BA | FDDI
| | DEFCN-MA | Con#2
+--------2-+ | [a] [b] |
FDDI- | DEFEB-AA | | DEFCN-FA |
Ether | [s]|-----MMF-----[m][m][m][m]----.
Bridge +----------+ | [ slot ] | |
+-------------+ |
| ===============
| |
.--------------------' | FDDI-
| | Ether
| | Bridge
SMF +--------1-+
| | DEFEB-AA |
| .--------|[s] |
`-----------------. | +----------+
| | CSB Bldg
FDDI +-----------1-+ | MMF
Con#1 |DEFCN-BA | | |
| DEFCN-DA | | |
+--------1-+ | [a] [b]---------' |
| DEFEB-AA | | DEFCN-NA | |
| [s]|-----MMF------[m][m][m][m]------------'
+----------+ | [ slot ] |
1CS Bldg +-------------+
LBJ Bldg
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 244.1 | I think your competition is wet. | WLW::PAYDAY::SEITZ | LOST-IN-SPACE | Thu Apr 25 1991 08:38 | 13 |
> a) Do you have to have a dual-ring No. a physical dual ring is not required in FDDI. For all practical purposes, the dual ring is located inside Concentrator #2. > b) have I configured the concentrators below correctly > (ie; the B-port of concentrator #1 plugged into > an M-port of concentrator #2?) It looks good to me. | |||||
| 244.2 | JAYJAY::KORNS | Thu Apr 25 1991 10:26 | 0 | ||