[Search for users]
[Overall Top Noters]
[List of all Conferences]
[Download this site]
| Title: | FDDI - The Next Generation |
|
| Moderator: | NETCAD::STEFANI |
|
| Created: | Thu Apr 27 1989 |
| Last Modified: | Thu Jun 05 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 2259 |
| Total number of notes: | 8590 |
172.0. "ELMS QAR database unavailable" by CSC32::WOESTEMEYER (Why??...Why not!!!) Tue Nov 13 1990 13:56
I had wanted to QAR the following ELMS problems, but the QAR database
for ELMS is unavailable, any idea why?
*********************************************************
Using Elms V1.1 or 1.0 it has been noticed that on page 2-26 of
the DECelms use manual the keyword for the fragmentation switch
are ENABLED or DISABLED. If these are entered with the "D", ie
disable(d) or enable(d), you get a parse error. Leaving the "D"
off solves the problem, however we have some very literial minded
customers.
*********************************************************
Using either ELMS V1.1 or 1.0 it has been noticed that the bridge
description field is truncated at 32 characters, not the 80 characters
in the documentation.
| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 172.1 | Answers | LEVERS::SWEET | | Thu Nov 15 1990 13:37 | 12 |
| Steve,
The QAR system is closed because ELMS V1.1 is out of field test and
in the SSB. As for your two questions: We likely left the "d"
off our command parser and the doc's are correct. And for number
2 the doc is incorrect the supported length is 32 by design.
Since ELMS V1.1 is the last planned release of ELMS we will have to
live with these ( I don't suspect we will lose any customers over
these).
Bruce
|