| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 444.1 | Does this work ?? | HLFS00::ERIC_S | Eric Sonneveld MCS - B.O. IS Holland | Thu Mar 13 1997 01:34 | 11 |
| Are you sure that this should work ?
I thought shared images can only be redirected at system /exec level,
so the system mgr should setup this for the whole system - and thus
interfere with other applications.
The only way to make TIMA in MOTIF work again is to set in the startup:
define/system/exec decw$terminalshr sys$share:decw$terminalshr12.exe
Eric
|
| 444.2 | | ULYSSE::CARPENTIER | | Fri Mar 14 1997 07:57 | 14 |
| Re .-1
Eric,
It works .
I've tested in setting an account without privs but with
TIMA_MAN,STARS_ALLPRIV,STARS_SETPRIV identifiers.
Could you give more precisions about the defined users' accounts
which invoke TIMA.
Jean-Francois
|
| 444.3 | Works for EXEC mode logicals in default tables | HLFS00::ERIC_S | Eric Sonneveld MCS - B.O. IS Holland | Mon Mar 24 1997 04:45 | 12 |
| The redirection works for /exec mode logicals in the proces,job, group
or system logicalname table.
A non priv user can not define /exec mode logicals.
Setup a new logicalname table for TIMA users only does not make sense,
the logicals are not translated (looks like TRNLOG is used rather than
TRNLNM).
The only workaround for this problem is to setup decw$terminalshr in a
group or the system logical name table.
Eric
|
| 444.4 | it works with TCP/IP without any extra | ULYSSE::CARPENTIER | | Tue Mar 25 1997 08:36 | 149 |
|
The following is the log file of the test made today .
As you could notice, the test succeeded with these parameters.
The test was made from a new system , with only TIMA running on it
and as you can see from a user without privileges, using the TCPIP
transport.
It works , as well, with DECNET transport.
If you have any questions, don't hesitate.
Jean-Francois
PROPERTY OF DIGITAL EQUIPMENT CORPORATION
INTERNAL USE ONLY
UNAUTHORISED ACCESS TO THIS NETWORK IS PROHIBITED
Username: CARPENTIER
Password:
OpenVMS VAX V6.2
Digital SEPS Development Platform
Last interactive login on Tuesday, 25-MAR-1997 15:48
Last non-interactive login on Tuesday, 25-MAR-1997 15:49
$ SHO DISPLAY
%DECW-W-OPENIN, error opening DECW$DISPLAY as input
-SYSTEM-W-NOSUCHDEV, no such device available
$ SET DISPLAY/CREATE/NODE=16.36.2.129/TRANSPORT=TCPIP
$
$ sh proc/all
25-MAR-1997 16:04:21.01 User: CARPENTIER Process ID: 20200422
Node: ACOUPA Process name: "CARPENTIER"
Terminal: RTA1: (52810::SYSTEM)
User Identifier: [CARPENTIER]
Base priority: 4
Default file spec: USER_ROOT:[CARPENTIER]
Devices allocated: ACOUPA$RTA1:
Process Quotas:
Account name:
CPU limit: Infinite Direct I/O limit: 100
Buffered I/O byte count quota: 39872 Buffered I/O limit: 100
Timer queue entry quota: 40 Open file quota: 300
Paging file quota: 31245 Subprocess quota: 8
Default page fault cluster: 64 AST quota: 198
Enqueue quota: 300 Shared file limit: 0
Max detached processes: 0 Max active jobs: 0
Accounting information:
Buffered I/O count: 92 Peak working set size: 516
Direct I/O count: 2 Peak virtual size: 4419
Page faults: 672 Mounted volumes: 0
Images activated: 2
Elapsed CPU time: 0 00:00:00.43
Connect time: 0 00:00:24.08
Authorized privileges:
NETMBX TMPMBX
Process privileges:
NETMBX may create network device
TMPMBX may create temporary mailbox
Process rights:
INTERACTIVE
REMOTE
TIMA_MAN
STARS_ALLPRIV
STARS_SETPRIV
System rights:
SYS$NODE_ACOUPA
Auto-unshelve: on
Image Dump: off
Process Dynamic Memory Area
Current Size (bytes) 51200 Current Total Size (pages) 100
Free Space (bytes) 47808 Space in Use (bytes) 3392
Size of Largest Block 47696 Size of Smallest Block 8
Number of Free Blocks 4 Free Blocks LEQU 64 Bytes 3
There is 1 process in this job:
CARPENTIER (*)
$
$ SET DISPLAY/CREATE/NODE=16.36.2.129/TRANSPORT=TCPIP
$ SHO DISPLAY
Device: WSA34: [super]
Node: 16.36.2.129
Transport: TCPIP
Server: 0
Screen: 0
$ SHO LOG DECW$TERMINALSHR
%SHOW-S-NOTRAN, no translation for logical name DECW$TERMINALSHR
$ SHO LOG CVMS$ENV_FACILITY
"CVMS$ENV_FACILITY" = "SEPS97" (LNM$SYSTEM_TABLE)
$ DEFINE DECW$TERMINALSHR SYS$SHARE:DECW$TERMINALSHR12.EXE
$ SHO LOG DECW$TERMINALSHR
"DECW$TERMINALSHR" = "SYS$SHARE:DECW$TERMINALSHR12.EXE" (LNM$PROCESS_TABLE)
$
$
$ TIMA
TIMA V2.4-1 Technical Information Management Architecture
Copyright (c) Digital Equipment Corporation, 1993
All Rights Reserved. Unpublished rights reserved
under the copyright laws of the United States.
The software contained on this media is proprietary
to and embodies the confidential technology of
Digital Equipment Corporation. Possession, use,
duplication or dissemination of the software and
media is authorized only pursuant to a valid written
license from Digital Equipment Corporation.
RESTRICTED RIGHTS LEGEND Use, duplication, or
disclosure by the U.S. Government is subject to
restrictions as set forth in Subparagraph (c)(1)(ii)
of DFARS 252.227-7013, or in FAR 52.227-19, as
applicable.
Badge number : 113694
Password
...Working
...Working
TIMA> EXIT
!!!!!!!!!THE display works fine in the windows!!!!!!The display terminal is a
PC using eXcursion
$ LOG
CARPENTIER logged out at 25-MAR-1997 16:01:39.21
|
| 444.5 | Does it fail on decw$terminalshr ? | HLFS00::ERIC_S | Eric Sonneveld MCS - B.O. IS Holland | Tue Mar 25 1997 23:50 | 6 |
| > Jean-Francois
Question: does it fail also when you do not define the decw$terminalshr
logical? Could you do a sh log /fu decw$terminalshr ?
Eric
|
| 444.6 | successful workaround | ULYSSE::CARPENTIER | | Thu Apr 17 1997 03:20 | 24 |
| Here is a workaround concerning that specific problem.
This workaround has been tested on a PC (running Windows-NT, eXcursion)
with an OpenVMS system and SEPS97 development environment on the VBO site.
The solution requires to have all the TIMA users registered in the
SYSUAF with the SAME UIC group number.
When it is done , insert the following lines in the TIMA startup :
Considering a TIMA user with the following uic : [101,0]
$ tima_uic_group = 101
$ run sys$system:loginout.exe /noauthorize/ uic=['tima_uic_group',0] -
/out=nl: /input=nl:
$ wait 00:00:10
$ define/table=lnm$group_000'tima_uic_group' /exec decw$terminalshr -
sys$share:decw$terminalshr12.exe
Now check on a TIMA user account, with a
$ show log/full decw$terminal*
Jean-Francois
|