| Is this the problem ?
We're waiting a fix - in the form of patchkit to relink tima after the
seps97 migration urgently as well.
eric
<<< EASE::DISK$TALAMH_RZ74:[NOTES$LIBRARY]SEPS97.NOTE;1 >>>
-< >-
================================================================================
Note 70.0 TIMA Problem -DECW$TERM_PORT Solved by relink with differ No replies
45538::OTTEN "David Otten @REO - 830 3044" 119 lines 8-JAN-1997 11:46
--------------------------------------------------------------------------------
Had a problem with TIMA Where decw$term_port service call wasn't
working. - although the same program would work OK on a Decstep6
platform, and all other decwindows programs except decterm appeared to
work correctly.
This is in the DECWINDOWS notesfile 5625.
The solution is to link with decw$terminalshr12/share, instead of
decw$terminalshr - That seems to work OK.
{DECTERM-NOTES} DECW$TERM_PORT not working under Motif 1.2-4 ?
******************** CAUTION: FOR INTERNAL USE ONLY
*********************
*
*
* THIS INFORMATION IS FOR USE BY DIGITAL EQUIPMENT CORP. AND ITS
*
* EMPLOYEES ONLY. PLEASE USE EXTREME CARE IF YOU MUST DISCUSS ANY
*
* PART OF THIS INFORMATION WITH ANYONE WHO IS NOT A DIGITAL
EMPLOYEE. *
*
*
******************************************************************************
================================================================================
Note 1853.0 DECW$TERM_PORT not working under Motif 1.2-4 ? 5
replies
MUNICH::STEFAN 43 lines
12-AUG-1996 08:04
--------------------------------------------------------------------------------
*** This is under discussion in notesfile ONTIME::DECTERM ***
Hi,
what is the trick ?
DECW$TERM_PORT produces under OpenVMS 6.2, ( linked )Motif 1.2-4 (
AXP/VAX )
the following error :
%RMS-F-DEV, error in device name or inappropriate device type for
operation
Linked under Motif 1.2-3 produces no error. The DECterminal
is displayed without any problem ( for example on a Motif 1.2-4
System )
Should I open an IPMT or have I/customer done anything wrong ?
Regards,
Stefan
PS: also in DECwindows Notes file 5625
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
$ EDIT CREATE_DECTERM.FOR
PROGRAM TEST
IMPLICIT NONE
CHARACTER DEVNAM*64
INTEGER DECW$TERM_PORT, IOSTAT
INTEGER*2 DVNLGT
IOSTAT = DECW$TERM_PORT(, , , DEVNAM, DVNLGT)
TYPE *,IOSTAT
CALL LIB$WAIT( 10.0 )
END
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
$ FORT CREATE_DECTERM.FOR
$ LINK CREATE_DECTERM,SYS$INPUT/OPTIONS
SYS$LIBRARY:DECW$XLIBSHR/SHARE
SYS$LIBRARY:DECW$TERMINALSHR/SHARE
$ RUN CREATE_DECTERM
================================================================================
Note 1853.1 DECW$TERM_PORT not working under Motif 1.2-4 ?
1 of 5
MUNICH::STEFAN 15 lines
14-AUG-1996 02:54
--------------------------------------------------------------------------------
-< Sorry, I gave the wrong error message >-
Sorry, I gave the wrong error message.
The small test program does nothing for some minutes
before displaying the following number :
47956082
$ set message SYS$COMMON:[SYSMSG]DECW$TERMINALMSG.EXE;1
$ write sys$output f$message(47956082)
%DECW-E-TIMEOUT_CONTROL, Timeout waiting for DECterm
controller to start
Any idea ?
Stefan
================================================================================
Note 1853.2 DECW$TERM_PORT not working under Motif 1.2-4 ?
2 of 5
MUNICH::STEFAN 4 lines
15-AUG-1996 03:52
--------------------------------------------------------------------------------
Hi,
the solution is ( small trick ) to link with
SYS$LIBRARY:DECW$TERMINALSHR12/SHARE
Stefan
|